iglide® J260, sleeve bearing, mm

Click for a larger view

Unsure whether it fits?
  • Ideal for plastic shafts
  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglide® J

Product description

Select article(s)



Required size not found?



iglide® J260 | Ideal for plastic shafts
 

  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglide® J
  • Long life time – even on polymer shafts and other special cases
  • Lubrication and maintenance-free
  • Standard range from stock
Time and again the iglide® J260 material proves its worth where the maximum service life and best friction coefficients are required under special application conditions - particularly in connection with plastic shafts! Similar to the classic, iglide® J, iglide® J260 is an endurance runner with outstanding wear behavior, but provides increased reserves at its long-term application temperature of +248°F.
 
Typical application areas

Vending machinery
Machine tools
Robotics
Electronic manufacturing

You will find plenty of additional application areas at our Industry solutions
 
 
When to use it?
  • When polymer shafts are used
  • When the temperature rating of iglide® J is not sufficient
  • If a bearing with a good coefficient of friction is required
  • If high wear resistance is required at medium loads
  • If good liquid media resistance is required
When not to use?
  • When high surface pressures occur
  • If temperatures are higher than +248 °F
  • When maximum universal wear resistance possible is required

 
Use our filter options to find the suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
 


Certificates and standards

Other solutions

Similar to illustration

Inquire
Name*:
Zip code:
Phone:
Email*:
Comments*:
Please complete the fields marked *

Consulting
I would be happy to answer your questions personally

Nicole Lang
+1 401 438 2200
Write e-mail


Contact
Back to top