iglide® A290, sleeve bearing, mm

Click for a larger view

Unsure whether it fits?
  • Robust, with high abrasion resistance
  • Complies with the requirements of the BfR
  • For direct contact with food
  • If low noise level is required

Product description

Select article(s)



Required size not found?



iglide® A290 | Robust, with high abrasion resistance
 

  • Complies with the requirements of the BfR
  • For direct contact with food
  • Good abrasion resistance
  • If low noise level is required
  • Lubrication and maintenance-free
  • Standard range from stock
iglide® A290 bearings are an advanced development for the use in food industry. Compared to the bearings made from iglide® A200, the tribological properties could be significantly improved.
 
Typical application areas

Food industry

You will find plenty of additional application areas at our Industry solutions
 
 
When to use it?
  • Suitable for contact with food
  • For low speeds
  • If low noise level is required
  • Physiologically safe
  • Very good mechanical properties
When not to use?
  • When the material’s FDA compliance is necessary
  • When the highest wear resistance is required
  • When temperatures are continuously higher than +284 °F
  • When a cost-effective universal bearing is required

 
Use our filter options to find the suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
 


Certificates and standards

Other solutions

Similar to illustration

Inquire
Name*:
Zip code:
Phone:
Email*:
Comments*:
Please complete the fields marked *

Consulting
I would be happy to answer your questions personally

Nicole Lang
+1 401 438 2200
Write e-mail


Contact
Back to top