iglide® T220, sleeve bearing, mm

Click for a larger view

Delivery time on request, please contact us
Unsure whether it fits?
  • Free from banned ingredients as requested by main manufacturers of tobacco products
  • The iglide® T220 material complies with food and drug administration (FDA) regulations
  • Lubrication and maintenance-free

Product description

List of available products on request


Required size not found?


iglide® T220 | For the tobacco industry and FDA-compliant
 

  • Free from banned ingredients as requested by main manufacturers of tobacco products
  • The iglide® T220 material complies with food and drug administration (FDA) regulations
  • Lubrication and maintenance-free
iglide® T220 is a special material for applications in the tobacco processing industry. It fulfils the demands of the tobacco industry (engineering database). The material is free of undesirable or banned ingredients, as requested by reputed manufacturers from 2004 onward. They are free from carcinogenic additives like, for instance, PTFE.
 
Typical application areas
  • Tobacco processing industry
You will find plenty of additional application areas at our Industry solutions
 
 
When to use it?
  • When my bearings need to be free of substances that are not permitted for applications in the tobacco industry
  • When FDA compliance is required
When not to use?
  • When high surface pressures occur
  • When a cost-effective universal bearing is required
  • If highest wear resistance and low pressure load is necessary
  • If the bearing should be free merely from PTFE and silicone

 
Use our filter options to find the suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
 


Certificates and standards

Other solutions

Similar to illustration

Inquire
Name*:
Zip code:
Phone:
Email*:
Comments*:
Please complete the fields marked *

Consulting
I would be happy to answer your questions personally

Nicole Lang
+1 401 438 2200
Write e-mail


Contact
Back to top