iglide® TX1, sleeve bearing, mm

Click for a larger view

Unsure whether it fits?
The heavy-duty bearing up to 29007 psi
  • Up to 29007 psi static and 20305 psi dynamic
  • Wear-resistant and dimensionally stable
  • Good liquid media resistance

Product description

Select article(s)



Required size not found?



iglide® TX1 | The heavy-duty bearing up to 29007 psi
 

  • Up to 29007 psi static and 20305 psi dynamic
  • Wear-resistant and dimensionally stable
  • Good liquid media resistance
  • Lubrication and maintenance-free
  • Standard range from stock
iglide® TX1 bearings represent excellent load bearing capacity under high radial loads coupled with good abrasion resistance. The special design not only ensures excellent dimensional stability thanks to the long-fiber winding but also allows lubrication and maintenance-free operation thanks to solid lubricants. High dirt and media resistance round off the list of properties.
 
Typical application areas

Agriculture
Construction machinery
Heavy machinery / Plant construction

You will find plenty of additional application areas at our Industry solutions
 
 
When to use it?
  • When permanently high static loads occur
  • For highly load pivoting motions
  • When not only high loads but also high temperatures and media resistance are required
When not to use?
  • When loads of far less than 14503 psi occur
  • For rotational movements during continuous operation
  • For high-temperature applications with average load levels

 
Use our filter options to find the suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
 


Certificates and standards

Other solutions

Similar to illustration

Inquire
Name*:
Zip code:
Phone:
Email*:
Comments*:
Please complete the fields marked *

Consulting
I would be happy to answer your questions personally

Nicole Lang
+1 401 438 2200
Write e-mail


Contact
Back to top