Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

High temperature plastic option of the chip-proof RX e-tubes from stock - 1,562°F from 24h

RX tube as high temperature version

RX tube as high temperature version

From stock against hot chips

The extremely dense plastic tube from igus® is now also available as HT version from stock. Thanks to the special material, hot chips up to 1,562°F cannot stick. The chip-repellent "round" and completely enclosed design make this series the perfect tube in direct use with chips. The highlight is: Even though it is completely enclosed, it can be opened in the outer radius and easily filled.

Temperature-resistant against chips at temperatures up to 1,562°F, hot chips do not adhere

To open in the outer radius

No holes, cracks, undercuts

IP40 tested (TÜV Nord) – RX40

Smooth, curved outer contour - chips do not stick

Interior separation and guide trough available


Application areas:Industries: Machine tools, machining, general mechanical engineering

Graphs Quantity (g) of burnt-in chips depending on the temperature Test: 20 g of hot chips (392 to 1,562 °F) applied on various materials. The graph shows which chip quantity was burnt-in. Winner: igumid HT up to 1,562° F.

Series RX32 HT

Order number Inner height Inner width Outer height External width Bending radius    
  hi [mm] Bi [mm] ha [mm] Ba [mm] R [mm]    
Ready to ship in 24 hours RX32-080-080-0-HT 25/42 3.15 2.36 4.06 3.15 69.38 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

Series RX40 HT

Order number Inner height Inner width Outer height External width Bending radius    
  hi [mm] Bi [mm] ha [mm] Ba [mm] R [mm]    
RX40-100-100-0-HT 31/52 3.94 2.76 4.84 3.94 91.86 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

Series RX48 HT

Order number Inner height Inner width Outer height External width Bending radius    
  hi [mm] Bi [mm] ha [mm] Ba [mm] R [mm]    
RX48-120-120-0-HT 37/62 4.72 3.31 5.81 4.72 Upon request Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

Series RX56 HT

Order number Inner height Inner width Outer height External width Bending radius    
  hi [mm] Bi [mm] ha [mm] Ba [mm] R [mm]    
RX56-140-140-0-HT 43/73 5.51 3.86 6.78 5.51 Upon request Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

Ready to ship in 24 hours
Delivery time on request

The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302