igubal® clevis joints

igubal® clevis joint  
Advantages:

Self-lubricating, dry running

Maintenance-free

High strength under impact loads

Compensation for misalignment

Chemical resistant

Vibration dampening

Suitable for rotating, oscillating and linear motion

High radial loads possible

Can be used in liquid media

Space-saving, low profile design

Easy to install

Predictable lifetime

General information

igubal® clevis joints are made from igumid G according to DIN 71752. igubal® clevis joints can be used in all sorts of demanding environments without a problem. The clevis joints are corrosion resistant, even in wet or moist environments, as well as resistant to weak acids and alkalis. They can operate in temperatures between -22°F to +176°F. igubal® clevis joints are made from a highly wear resistant material, which requires no lubrication.

Loads

The load-bearing capacity of igubal® maintenance-free, plastic clevis joints is very high at normal ambient temperatures. They absorb high forces, possess very good vibration dampening properties, and yet weigh only a fifth of conventional metal bearing housings. However, plastic-specific properties, such as dependence on temperature and behavior under long-term stressing, must be taken into consideration when using the clevis joints. The load-bearing capacity of the clevis joints in individual cases should therefore be checked in a practical test, particularly if they are to be used under continuously high loads and at elevated temperatures.

Chemical resistance

igubal® clevis joints are resistant to weak alkalis and weak acids, as well as to fuels and all types of lubricants. Please contact us if you have any questions about the chemical resistance of igubal®.

igubal® clevis joint, inch

Clevis joint, inch

igubal® clevis joint, inch    

igubal® clevis joint, mm

With and without pin and circlip

igubal® clevis joint, mm    

igubal® clevis joints with spring loaded pins, mm

Combinable with rod end bearings of the dimensional series E

igubal® clevis joints with spring loaded pins, mm    

igubal® clevis joint combination, mm

Complete knee joints consisting of clevis joint and rod end bearing

igubal® clevis joint combination, mm    

igubal® spring loaded pin, mm

Combinable with clevis joints of the dimensional series E

igubal® spring loaded pin, mm    

igubal® pin, mm GBM/GBI - GSR

Pin and circlip

igubal® pin, mm GBM/GBI - GSR    
igus® inc.
PO Box 14349
East Providence
R.I. 02914

For immediate assistance in North America:

Call 1 (800) 521 2747
E-mail us
Subscribe to
e-newsletter

Contacts in your location (can be on-site within 24-48 hours)

myigus myCatalog

About igubal®Product OverviewProduct SelectorLifetime calculation3D-CAD libraryPart No. searchRequest a quoteCatalog/sample requestEmail the product expertShaftsApplication examplesVideosTechTalk Design Advice SeriesDownloads

No minimum order
On-site and telephone support Delivery from 24h* Free samples

More than 100,000 products available! Open Mon-Fri 8:00 am - 8:00 pm EST.
No minimum order

Newsletter Registration
Terms and Conditions Imprint General Information Data Privacy Protection Declaration