1. Universal: Mounting bracket with strain relief option Quickflange optional 2. Stable: Large, assembly-friendly pins 3. Cable-friendly: Very smooth contours - best cable protection 4. Low noise: Built-in "brake" reduces noise 5. Robust: Square stop dog system for large additional loadsn 6. Multi-optional: non-opening or snap-open on both sides along the inner and outer radius
* The required clearance height is HF = H + .39 in. (10 mm) (with .13 lbs/ft (0.2 kg/m) We request you to consult in case of especially restricted space ratios.
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch per link: = .79” (20 mm)
Links per ft (m): = 15.24 (50)
For center mount applications:
Chain length = s/2 +K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG
Y-axis Additional load in kg/ft
Lower scale: Travel S in ft
FLB = unsupported with permitted sag
FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Other installation types
Option 1: Separators
Variant 1 - Separator
Separators can be placed anywhere in the chain's cross-section in order to divide up the interior of the e-chain® - As a standard feature, separators are fitted every 2nd chain link!
Note: with the E2C-10. Insert the interior separators before assembling the e-chain®!
Standard separator - E2-10-2
For easy vertical division in energy chains. Separator can be arranged in any position in the chain cross section. No snap-in option, freely movable.
for locking crossbar E2-10-5 - Locks in securely in 2.5 mm increments
The notch separator can be precisely positioned. Ideal for applications turned 90°. Separators have cable friendly rounded design.
Polymer - locking
Plastic, pivoting on one side
Plastic - pivoting on both sides
Data protection declaration