The ESD E4-1 system combines all the advantages
of its three predecessors and is the best system in the igus® range of e-chains®. Series E4.1 is stronger whilst having the same or even smaller dimensions than the previous versions. Almost all accessories
and mounting dimensions are
identical. With the the igus® E4-1 system, the service life
of your application can be increased even more
with lower costs.
Available inner widths Bi: 75 to 300 mmAvailable bending radii R: 135 to 250 mmPitch: 91 mm/link = 11 links / m
* The required clearance height is HF = H + 50 mm (with 3 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed end
Pitch per link: = 3.58” (91 mm)
Links per ft (m): = 3.35 (11)
For center mount applications:
Chain length = s/2 +K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLG
Y axis: Fill weight in kg/ft
Lower scale: Travel S in ft
FLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
The diagrams for unsupported lengths
apply to standard e-chains® in igumid GLW material. The values
can also be used for assessing e-chain® applications
in ESD special material.
If the respective maximum unsupported length exceeds 80%, the suitability of the e-chain® should be verified by a practice-oriented test.
from 12 m to max. 400 mChain length= S/2+K2Long travels - gliding (up to max. 400 m) Here, the e-chain® upper runs gliding on the lower run in a guide trough. We recommend letting our engineers support you when planning this type of system. In case of travel lengths between 10 and 12 m, we recommend a larger unsupported e-chain®.
A1 = Moving endA2 = Fixed end A3 = Guide trough with glide bar A4 = Guide trough with glide bar A5 = Total length of the guide trough
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
6 widths and 5 bend radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Supplement to the installation instructions
EC Declaration of Conformity
Option 1: Standard
Standard ESD separator
For all applications. Provides maximum holding strength
and secure stability. Separators are fitted
every 2nd chain link as standard! Other shelving elements
available on request.
KMA - pivoting
"Super-aluminium", "Basic" guide trough
"Super-Alu" guide trough, "Heavy Duty"
Steel guide troughs
1. Trough side part, aluminium, 2 m
2. Glide bar, plastic, 2 m
3. Plastic glide strips*, side, 2 m
4. Clamping shoe, aluminium
5. C-profile, galvanised steel
6. Screw M8 x 20
7. Sliding nut M8
8. "Basic" connector, plastic
10. Optional: Silencer profile, rubber
*without glide strips on request
"Super-aluminium" trough - the igus® standard for guide troughs
The "Super" aluminium trough is a modular system of guide troughs for long travels (where e-chains® are gliding on top of themselves). The basic "Super" aluminium trough has a simple and cost-efficient designs and can be expanded for sophisticated plant engineering.
Its universal design makes it the recommended igus® standard for guide troughs.
1. Interface connector
2. Plastic glide bar
3. Clamping shoe
4. Glide strips
9. Heavy-duty bracket option, aluminium
11. Screw M8 x 25
1. Aluminium profiles
3. Heavy-duty bracket option
6. Silencer profiles
1. Guide trough (blue)2. Glide bar (black)3. Installation set (red)4. Individual bracket without C-profile5. Profile rail length
+ Easy assembly using installation sets+ 2-part design - configurable from chain width+ Very stable+ cost-effective+ large selection
Guide trough without glide bars, Part No. 94.30, guide trough with glide bars Part No. 94.31
Installation sets, Part No. 94.50. XX
Support tray - Type 1
Data protection declaration