2. Fast assembly:
opens along the inner and outer radius
Small pitch for quiet, smooth run
High speeds and accelerations
5. Long service-life:
high tensile strength
6. Minimised abrasion:
No pin and bore connections
7. Modular design:
Can be arbitrarily shortened or extended
Inner widths Bi: 30 to 140 mmBending radii R: 55 to 150 mm
* The required clearance height is HF = H + 25 mm (at 2 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted
** The calculated length corresponds to the chain length without mounting brackets.
A = Moving end, B = Fixed endPitch: 22 mmLinks per m: 46 links/1012 mmTravel: SChain lenghts = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Variant 1: Standard
E6-29-1 Standard - for any application
Separator, wide foot for maximum holding force and safe standing in e-chains®
E6-29-2 Faster cable assembly
One side fixed seating with wide base, narrow opposite side for easy cable installation (easily clamped).
2300.x Horizontal separation
Locks in securely on both ends of the separator, fixed widths possible. Can be used as full width shelf for an integrated separation or as shelf for a rack-like separation in 3 planes.
KMA - pivoting
Guide tray type 01
Data protection declaration