Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

Guide rollers with L-slot

Number of products: 4

iglide® H1, track roller, L-groove, 90°, mm

  • Endurance runner with high media resistance
  • High wear resistance in extreme ambient conditions
  • Very low coefficient of friction
  • High resistance to temperature and chemicals
from 5.58 USD/Pc.
9 variants ready for shipping:
2 variants within 24 hours
7 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglide® P210, track roller, L-groove, 90°, mm

  • Specialist for pivoting, rolling applications and more - good coefficient of friction and wear on almost every shaft
  • Low moisture absorption
  • Extremely wear-resistant, especially with loads of up to 20MPa in pivoting applications
  • Versatile: good performance on many different shafts
  • Good with edge loads
  • Self-lubricating and maintenance-free
  • Standard range from stock
Upon request
9 variants ready for shipping:
3 variants within 24 hours
6 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglide® A350, track roller, L-groove, 90°, mm

  • The endurance runner at higher temperatures in the food sector
  • Complies with Regulation (EU) No. 10
  • FDA compliant
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • For use with temperatures up to +356°F
Upon request
3 variants ready for shipping:
2 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglide® A180, track roller, L-groove, 90°, mm

  • The FDA-compliant all-rounder
  • The iglide® A180 material complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
Upon request
9 variants ready for shipping:
9 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

Application Assistance

For further questions or product information, please contact:

Photo
Hope Mammone

iglide® Product Manager

Email

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH