My contact person
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
igus® inc.

Vice President

East Providence, RI

+1 401 438 2200
+1 401 438 7270

xiros® races made of xiros® D180

The advanced material xiros® D180 is now much quieter and suitable for high rotational speeds with low radial load. They are even more wear-resistant and therefore have a longer service life.
 

For temperatures up to +176ºF

For higher speeds up to 5,000 rpm

Very quiet


 
Typical applications:Roof fans, blowers, pumps, ATM's, cash counting machines, printers, ...

Material xiros® D180 improved  
Material xirodur® D180 improved  
Ball material stainless steel
Part No.:
Ordering number Inner Ø Outer Ø Width max. stat.
load
load capacity max speed Weight    
  d1 d2 b1 axial [N] stat. [N] dyn. [N] [min-1] [g]    
 BB-623-D180-10-ES 3 10 4 1 2 12 5500 0.4 3.56 USD 
 BB-626-D180-10-ES 6 19 6 5 13 30 4500 2 4.13 USD 
 BB-608-D180-10-ES 8 22 7 7 20 42 4300 3.7 4.46 USD 
 BB-6000-D180-10-ES 10 26 8 10 28 36 4200 6.1 5.07 USD 
 BB-6001-D180-10-ES 12 28 8 12 32 49 4000 6.6 5.57 USD 
 BB-6002-D180-10-ES 15 32 9 14 44 54 3870 8.5 5.89 USD 
More about selected part:
3D-CAD Product page Sample request Experts PDF Quote request Price list myCatalog
Ball material glass
Part No.:
d1 [mm]:
Ordering number Inner Ø Outer Ø Width max. stat.
load
load capacity max speed Weight
d1 d2 b1 axial [N] stat. [N] dyn. [N] [min-1] [g]
 BB-623-D180-10-GL 3 10 4 - 7 12 5500 0 7.76 USD 
 BB-626-D180-10-GL 6 19 6 - 13 18 4500 0 5.39 USD 
 BB-6000-D180-10-GL 10 26 8 - 28 36 4200 0 13.57 USD 
 BB-608-D180-10-GL 8 22 7 - 20 32 4300 0 Upon request 
 BB-6001-D180-10-GL 12 28 8 12 32 49 4000 6.6 Upon request 
 BB-6002-D180-10-GL 15 32 9 14 44 54 3870 8.5 5.89 USD 
More about selected part:
3D-CAD Sample request Experts PDF Quote request Price list myCatalog

Recommended hole and shaft tolerance for xiros® radial grooved ball bearings
As standard, we recommend an H7 tolerance for the housing bore of the xiros® radial grooved ball bearing and an H6 tolerance for the shaft. If you have any particular questions about the design of your hole and shaft, we'd be glad to hear from you.

More information: