The design of this support tray emulates the igus® aluminum trough.
This flexible construction kit covers the standard sizes of our e-chains®.
The aluminium support tray is suitable for the Series E2/000, E4-21/E4-28/E4-32 and E6-29/E6-35/E6-40.
Because of its flexible width adjustment through mounting kits with C-profiles, the support tray is can be used with all e-chain® with outer widths of 2.17 inches and greater.
Standard installation sets can be used, just as for the aluminum trough.
The plastic fixed-end modules can be used here as well.
Potential application areas: - Can be used for any unsupported application
- General machine construction, material processing, tool machines, etc.
Corrosion and seawater-resistant aluminum profile
Wear-reducing slide bar integrated as a standard
Built-in silencer profile means e-chain® runs quietly
Simple assembly on flexible-width C-profiles with basic clamping shoe
e-chain® easily connects to support trough with plastic fixed end modules
Open design principle so debris can fall through the trough; if a closed bottom is required, it can be integrated as an option
Part No. | Trough height | ||
---|---|---|---|
9AT-35-SLA-1000 | 1.38 | Upon request | |
9AT-35-SLA-2000 | 1.38 | 156.40 USD |
Part No. | Trough width | Trough height | ||
---|---|---|---|---|
960AT-30-100 | 3.94 | 1.38 | 12.04 USD | |
960AT-30-125 | 4.92 | 1.38 | 12.22 USD | |
960AT-30-150 | 5.91 | 1.38 | 12.75 USD | |
960AT-30-200 | 7.87 | 1.38 | 13.83 USD | |
960AT-30-250 | 9.84 | 1.38 | 14.94 USD | |
960AT-30-300 | 11.81 | 1.38 | 10.11 USD |
The installation kits can also be ordered with a C-profile of stainless steel (Part No. ending E).
Please specify this information in your request.