Assembly instructions for e-chain system® E4-1

Assembling e-chains® and E-Tubes

System E4.1 assembly Line up two inner side links, side by side. Attach an outer side link between, push side links together
System E4.1 assembly Assemble crossbars - Push down and snap in by using a screwdriver
System E4.1 assembly Assemble clips (e-chains® with crossbars every other link) - Push down and snap in
System E4.1 assembly Assemble E-Tube lids/bottoms - Attach to the connector at an angle - Snap in

Separating e-chains® and E-Tubes

System E4.1 disassembly Remove crossbars, clips, lids and bottoms at the outer links…
System E4.1 disassembly ...guide the screwdriver into the slot between side links and release it by levering …
System E4.1 disassembly ..remove the outer links to the side…
System E4.1 disassembly ...and separate the e-chain®

Opening e-chains®

System E4.1 assembly Remove crossbars - Insert screwdriver into the slot, push down, release by lever action
System E4.1 assembly Remove clips - Insert screwdriver into the slot and push down, release by lever action

Opening E-Tube

System E4.1 assembly Remove lids/bottoms - Insert screwdriver into the slot, release by lever action
System E4.1 assembly Release only one side to swivel the lid!