My contact person
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
igus® inc.

Vice President

East Providence, RI

+1 401 438 2200
+1 401 438 7270

Cable carrier solutions for cranes - Guidefast

Economical energy supply for crane girders and indoor cranes - quickly installed as a modular kit solution

For applications such as indoor cranes, the Guidefast guide trough system offers all of the traditional benefits of energy chain® systems versus festoons, with the added advantage of fast and easy installation. The guide trough installation bracket is mounted to the side of the crane girder with a single bolt - fabrication and welding of special brackets is eliminated. Installation times are kept very short, as the guide trough only needs to be mounted in the previously installed brackets and then fixed with clamping blocks. Installation of a complete system can be done by a single person in only a few hours.

Learn more about e-chain® vs Festoon systems

guidefast with trough  

The many benefits of e-chain®:

1. Fast and simple fastening with clamping installation brackets

2. Single-part steel trough with 6.56 feet standard length

3. Glide bar for cost effective center mount configuration

4. Guide trough segments are connected with clips, avoiding misalignment

5. Installation brackets with integrated strain relief for routing of additional cables

Why e-chain®?

Reduce your installation time by up to 80% compared to conventional guide trough systems

Fits virtually any standard crane girder

2 installation bracket options with integrated strain relief for routing of fixed cables.

Standard trough length of 2.0 m - with or without glide bar

Can be used for any side mounted application - not limited to cranes

Pre-drilled holes for the e-chain® mounting brackets and pre-cut windows in the bottom of the trough for cable entry/exit

Standard material: galvanized steel. Also available in stainless steel or black powdercoat

Long-term tested to withstand vibration and rough environments


 

Product Specifications

Guidefast Components
Guidefast components  

1. Trough profile, 6.56 feet each
2. Plastic glide bar, 6.56 feet each, optional
3. Clip, Part No. 908-467
4. Trough Bracket

guidefast brackets  
Guidefast specifications  

Installation Drawing

Guidefast installation drawing  



Let us install your guidefast system for you!Have an igus® expert come on site and install your guidefast system.

Our service includes:

  • Fixed cost quote for the assembly, maintenance, or inspection of your energy chain® System
  • Installation and maintenance by qualified personnel
  • Reduce downtime and machine breakdowns

Ordering

Guide troughs

Standard length: 6.56 feet

Standard material: Galvanized steel

Pre-drilled holes for the e-chain® mounting brackets and pre-cut windows in the bottom of the trough for cable entry/exit

Glide bar version available for center mounted installation

Different part number according to size - please see details in the table below

Guidefast trough  
Part No.:
Width [inch]:
Article number Width Inner width
trough
For e-chain®: with or without A B    
  [inch] BRi [inch]   Glide bar [inch] [inch]    
 GF91-30-025-2000 0.13 - 1500-025-RRR-0 without glide bar 0.1 0.13 Upon request 
 GF91-30-050-2000 0.17 - 1500-050-RRR-0 without glide bar 0.1 0.17 Upon request 
 GF92-30-05-2000 0.18 - 2500-05-RRR-0 without glide bar 0.11 0.18 Upon request 
 GF92-30-07-2000 0.21 - 2500-07-RRR-0 without glide bar 0.11 0.21 Upon request 
 GF92-30-10-2000 0.26 - 2500-10-RRR-0 without glide bar 0.11 0.26 Upon request 
 GF95-30-05-2000 0.17 - 2700-05-RRR-0 without glide bar 0.17 0.17 Upon request 
 GF95-30-07-2000 0.21 - 2700-07-RRR-0 without glide bar 0.17 0.21 Upon request 
 GF95-30-10-2000 0.25 - 2700-10-RRR-0 without glide bar 0.17 0.25 Upon request 
 GF91-31-025-2000 0.13 - 1500-025-RRR-0 with glide bar 0.1 0.13 Upon request 
 GF91-31-050-2000 0.17 - 1500-050-RRR-0 with glide bar 0.1 0.17 Upon request 
 GF92-31-05-2000 0.18 - 2500-05-RRR-0 with glide bar 0.11 0.18 Upon request 
 GF92-31-07-2000 0.21 - 2500-07-RRR-0 with glide bar 0.11 0.21 Upon request 
 GF92-31-10-2000 0.26 - 2500-10-RRR-0 with glide bar 0.11 0.26 Upon request 
 GF95-31-05-2000 0.17 - 2700-05-RRR-0 with glide bar 0.17 0.17 Upon request 
 GF95-31-07-2000 0.21 - 2700-07-RRR-0 with glide bar 0.17 0.21 Upon request 
 GF95-31-10-2000 0.25 - 2700-10-RRR-0 with glide bar 0.17 0.25 Upon request 
More about selected part:
3D-CAD Product page Quote request Price list myCatalog

Bracket short version

Includes clamping block and screw

Short tie wrap plate for installation of additional static cables

Standard support interval: 1 bracket every 3.28 ft (1 m)

Guidefast short bracket  
Part No.:
Article number    
 GF9-2-12 Upon request 
 GF9-2-12-CD Upon request 
More about selected part:
3D-CAD Product page Quote request Price list myCatalog

Bracket long version

Includes clamping block and screw

Long tie wrap plate for installation of additional static cables

Standard support interval: 1 bracket every 3.28 ft (1 m)

Guidefast long bracket  
Part No.:
Article number    
 GF9-2-11 Upon request 
 GF9-2-11-CD Upon request 
More about selected part:
3D-CAD Product page Quote request Price list myCatalog

Connector

Used to connect the outboard edge of two trough pieces

Installed with a rubber mallet

Guidefast connector  
Part No.:
Article number    
 908-467 Upon request 
More about selected part:
3D-CAD PDF Quote request Price list myCatalog
Guidefast installation

Quickly mounted with a few hand movements - the Guidefast guide trough.

 

Installation through weld-on bolt or screw/thread directly on the crane

 
More information: