Inquiry / Contact
igus® inc.
US(EN)
The drylin® ZLW-0630 belt drive is for easy adjustment and positioning tasks in restricted spaces. The installation height is just 31 mm, width is 54 mm, and max. stroke is 1000 mm.
ZLW-0630-LCB: (Formerly ZLW-0630-B - 'Basic'). Low cost, basic version uses a glass-reinforced neoprene belt and is meant for lower loads and speeds than version S. Max. load = 100 N. Max. speed = 2 m/s.
ZLW-0630-S: Standard table with steel-reinforced polyurethane belt, enhanced pulley system and other components for higher speeds and loads than version LCB. Max. load = 150 N. Max. speed = 2 m/s.
L max.: |
|
| Order no. | Weight without stroke [kg] | Weight 100 mm stroke [kg] | Max. stroke length [mm] | A -0.3 | Al | H | E2 ±0.15 | l | hc | E3 ±0.15 | R ±0.15 | f | Individual price for base stroke 100 mm | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZLW-0630-02-B-60-L (1) | 0.38 | 0.08 | 1000 | 54 | 60 | 31 | 45 | 144 | 13.5 | 51 | 30 | 3 | 257.78 USD | |
| ZLW-0630-02-B-60-R (1) | 0.38 | 0.08 | 1000 | 54 | 60 | 31 | 45 | 144 | 13.5 | 51 | 30 | 3 | 257.78 USD | |
| ZLW-0630-02-S-60-L (2) | 0.43 | 0.08 | 1000 | 54 | 60 | 31 | 45 | 144 | 13.5 | 51 | 30 | 3 | 485.41 USD | |
| ZLW-0630-02-B-60-L/R (1) | 0.38 | 0.08 | 1000 | 54 | 60 | 31 | 45 | 144 | 13.5 | 51 | 30 | 3 | 274.73 USD | |
| ZLW-0630-02-S-60-R (2) | 0.43 | 0.08 | 1000 | 54 | 60 | 31 | 45 | 144 | 13.5 | 51 | 30 | 3 | 485.41 USD | |
| ZLW-0630-02-S-60-L/R (2) | 0.43 | 0.08 | 1000 | 54 | 60 | 31 | 45 | 144 | 13.5 | 51 | 30 | 3 | 502.36 USD | |
| ZLW-0630-02-B-100-L (1) | 0.38 | 0.08 | 1000 | 54 | 100 | 31 | 45 | 144 | 13.5 | 87 | 30 | 3 | 228.43 USD | |
| ZLW-0630-02-B-100-R (1) | 0.38 | 0.08 | 1000 | 54 | 100 | 31 | 45 | 144 | 13.5 | 87 | 30 | 3 | 228.43 USD | |
| ZLW-0630-02-B-100-L/R (1) | 0.38 | 0.08 | 1000 | 54 | 100 | 31 | 45 | 144 | 13.5 | 87 | 30 | 3 | 233.11 USD | |
| ZLW-0630-02-S-100-L (2) | 0.43 | 0.08 | 1000 | 54 | 100 | 31 | 45 | 144 | 13.5 | 87 | 30 | 3 | 485.41 USD | |
| ZLW-0630-02-S-100-R (2) | 0.43 | 0.08 | 1000 | 54 | 100 | 31 | 45 | 144 | 13.5 | 87 | 30 | 3 | 485.41 USD | |
| ZLW-0630-02-S-100-L/R (2) | 0.43 | 0.08 | 1000 | 54 | 100 | 31 | 45 | 144 | 13.5 | 87 | 30 | 3 | 502.36 USD |
(1) Dimension d2: 6mm square / with adapter Ø10mm and dimension X freely selectable
(2) Dimension X is cut-to-order
| Order no. | lt ±0.3 | sg | ha | lz | l2 | d2 | X | E ±0.2 | AP -1 | LP | dp | n | nb | nw | nh | T1 ±0.25 | T2 ±0.25 | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZLW-0630-02-B-60-L (1) | 42 | M4 | 14 | 20 | 20 | 10 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-B-60-R (1) | 42 | M4 | 14 | 20 | 20 | 10 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-S-60-L (2) | 42 | M4 | 14 | 20 | 20 | 8 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-B-60-L/R (1) | 42 | M4 | 14 | 20 | 20 | 10 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-S-60-R (2) | 42 | M4 | 14 | 20 | 20 | 8 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-S-60-L/R (2) | 42 | M4 | 14 | 20 | 20 | 8 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-B-100-L (1) | 42 | M4 | 14 | 20 | 20 | 10 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-B-100-R (1) | 42 | M4 | 14 | 20 | 20 | 10 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-B-100-L/R (1) | 42 | M4 | 14 | 20 | 20 | 10 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-S-100-L (2) | 42 | M4 | 14 | 20 | 20 | 8 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-S-100-R (2) | 42 | M4 | 14 | 20 | 20 | 8 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 | |
| ZLW-0630-02-S-100-L/R (2) | 42 | M4 | 14 | 20 | 20 | 8 | 40 | 52 | 15 | 5.5 | 5.2 | 9.5 | 4.3 | 7 | 20 | 21 | 3.2 |
(1) Dimension d2: 6mm square / with adapter Ø10mm and dimension X freely selectable
(2) Dimension X is cut-to-order
Determination of the position of the drive shaft (right or left), in the line of vision x!
1 = drive shaft left
2 = drive shaft right
x = in the line of vision of drive shaft
| ZLW | Toothed belt linear axis drylin® W | ||||||
| -0630 | Size 0630 (Guide shaft profile 6 mm / Shaft distance 30 mm) | ||||||
| -02 | |||||||
| -B | B = LCB S = Standard | ||||||
| -60 | Carriage length in mm (Standard = 60 mm) | ||||||
| -L | L = drive pin left R = drive pin right L/R = drive pin on both sides | ||||||
| -XX | Stroke length in mm |
