Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

iglidur®A160 sheets

Bigger is better ...

Our proven A160 material is now also available as a sheet. The sheets are 1,000mm wide and 1,000mm long, and are suitable for large-area lining of tribologically stressed surfaces. The material iglidur® A160 convinces due to its media resistance and compliance with FDA and EU10/2011 regulations.

Tech up

Tech up

  • For large-area lining of tribologically stressed surfaces
  • FDA- and EU10-compliant for chemicals and food
  • High media resistance

Cost down

Cost down

  • Save costs and choose from many dimensions and thicknesses
  • Maintenance-free properties reduce costs for lubrication and maintenance
  • Cost-effective



Successfully used in various applications by many customers



A160 convinces with high service life in the test

iglidur® A160 against PTFE with fibre glass

Our iglidur® A160 and a competitor material made of PTFE with fibre glass were tested in a linear wear test.
The test showed the following:
linear wear [mg/km] tribo-tape at 0.16m/s; 1MPa and 23°C vs. 1.4305

Free sample box

Order a free bar stock sample box now in order to try out the wear-resistant and diverse iglidur® materials.

Order a sample box now

Free brochure

Download the bar stock brochure now and find out more about the use of iglidur bar stock. In the brochure, you will find information on properties and processing

Download brochure now