Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

iglide® L500: New material for fast continuous operation

Self-lubricating high speed runner

iglide® L 500

Specially developed for fast continuous operation under low loads, iglide® L500, inter alias, is intended for fan and electric motor applications.
 

Lubricant and maintenance free

Up to +482 °F continuous use

Up to 5 m/s rotating

Extremely wear-resistant

Low moisture absorption

Low thermal expansion


 
Typical application areas: Fans, electric motors, fans, …

Result wear test sintered bearing against iglide® L500 Result wear test sintered bearing against iglide® L500
x-axis: Sliding speed [m/s]
y-axis: Wear rate [µm/km]
Black: iglide® L500
Brown: Sintered bearing
iglide L500

Dimensions according to ISO 3547-1 and special dimensions 
 
Chamfer in relation to the d1

d1 [mm]f [mm]
Ø 1–60,3
Ø 6–120,5
Ø 12–300,8
Ø > 301,2

Material table

General features
Density 1.53 g/m3
Color black
moisture absorption at 73 °F and 50 %r. h. 0,1 weight-%
Max. water absorption 0,3 weight-%
Thermal properties
Max. long term application temperature +482 °F
Max. short term ambient temperature +599 °F
Minimum application temperature -148 °F

Plain bearings, cylindrical

Part Number d1 d1 tolerance d2 b1    
Delivery time on request L500SM-0608-06 0.24 0.001 0.31 0.24 6.43 USD Add to shopping cart
ready for shipping in 24 - 48 hours L500SM-0810-10 0.31 0.001 0.39 0.39 5.89 USD Add to shopping cart
ready for shipping in 24 - 48 hours L500SM-1012-10 0.39 0.001 0.47 0.39 6.22 USD Add to shopping cart
ready for shipping in 24 - 48 hours L500SM-0304-03 0.12 0.001 0.18 0.12 Upon request Add to shopping cart
Delivery time on request L500SM-0405-04 0.16 0.001 0.22 0.16 Upon request Add to shopping cart
Delivery time on request L500SM-0507-05 0.2 0.001 0.28 0.2 Upon request Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
PDF PDF
Quote request Quote request
myCatalog myCatalog

* After pressfit of the bearing in a housing with nominal dimension, the inner diameter of the bearings adjusts itself to an E10 tolerance.

Plain bearing with flange

Part Number d1 d1 tolerance d2 d3 b1 b2    
L500FM-0304-05 (1) 0.12 0 0.18 0.3 0.2 0.03 Upon request Add to shopping cart
L500FM-0405-04 (1) 0.16 0 0.22 0.37 0.24 0.03 Upon request Add to shopping cart
L500FM-0507-07 (1) 0.2 0 0.28 0.43 0.28 0.04 Upon request Add to shopping cart
L500FM-0608-08 Upon request Add to shopping cart
L500FM-0810-09 (1) 0.31 0.001 0.39 0.59 0.35 0.04 Upon request Add to shopping cart
L500FM-1012-09 0.39 0.001 0.47 0.71 0.39 0.04 Upon request Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Quote request Quote request
myCatalog myCatalog

* After pressfit of the bearing in a housing with nominal dimension, the inner diameter of the bearings adjusts itself to an E10 tolerance.
(1) The specified d1 tolerance adjusts itself after press fit into housing bore. Test method

Delivery time

Delivery

from July


ready for shipping in 24 - 48 hours
Delivery time on request