Long service life on steel

The new iglide® gliding material was developed specially for linear movements. Its strength is its durability and the low wear rate on round bars of steel, chrome-plated steel, and all sorts of stainless steel - hardened and unhardened shafts. The operating temperature is -22°F up to +176°F. The iglide® E7 is offered as a liner for the 10-30 mm diameter and can be combined with all linear housings in the drylin® R type series. The slotted geometry of the liners enables easy installation.

Good wear resistance on steel shafts

Easy assembly

Self-lubricating- and maintenance-free

Dimensions [mm]

Order number	d1	d2	b1	r	t	Z	Weight [g]
E7UM-01-10	10	12	28	3	0.8	2.5	0.73	6.08 USD
E7UM-01-12	12	14	31	3	0.8	3	1.01	6.57 USD
E7UM-01-16	16	18	35	3.5	0.8	3.5	1.45	7.71 USD
E7UM-01-20	20	23	44	5	0.8	3.5	3.25	8.49 USD
E7UM-01-25	25	28	57	5	0.8	4	5.44	9.48 USD
E7UM-01-30	30	34	67	5	0.8	4	9.88	18.46 USD
E7UM-01-40	40	44	79	6	1.3	5	17.3	28.06 USD
E7UM-01-50 ⁽¹⁾	50	55	99	7	1.3	6	36.3	34.27 USD
E7UM-01-60 ⁽¹⁾	60	65	124	8	2.5	6.5	54.8	40.50 USD

More about selected part:

3D-CAD

Sample request

PDF

Quote request

myCatalog

according to igus® test method
(1)

Housing bore for liner E7UM-01 | Dimensions [mm]

Order no.	shaft	di	B	r	t	f	z
	[mm] Ø	H7	h10	+0,05	+0,1	+0,5	+0,2
E7UM-01-10	10	12	29	3	1	1	2.6	6.08 USD
E7UM-01-12	12	14	32	3	1	1.5	3.1	6.57 USD
E7UM-01-16	16	18	36	3.5	1	1.7	3.6	7.71 USD
E7UM-01-20	20	23	45	5	1	2	3.6	8.49 USD
E7UM-01-25	25	28	58	5	1	2	4.1	9.48 USD
E7UM-01-30	30	34	68	5	1	2	4.1	18.46 USD
E7UM-01-40	40	44	80	6	1.5	2.5	5.1	28.06 USD
E7UM-01-50 ⁽¹⁾	50	55	100	7	1.5	2.5	6.1	34.27 USD
E7UM-01-60 ⁽¹⁾	60	65	125	8	2.5	3	6.5	40.50 USD