Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

Robolink draw wire grippers - other grippers adaptable

Robolink grippers
Robolink draw wire grippers:

Material: PA 2200

Tensile strength open, elasticity closed

Stop dog Robolink tube

Standard adapters (from PA 2200) Various grippers are adaptable. Standard adapters (from PA 2200) currently available for the following products: FESTO: DHPS-10-A-NC; HGWM-08-Ex-G7; HGWM-12-EX-G7; adaptive grippers. SCHUNK: SGB-32; SGW-40.

Dimensions [mm]

Order number l1 dT    
More about selected part:
myCatalog myCatalog

2 or 3-jaw gripper with electric motor


Simple Plug & Play – compatible with all Robolink systems and can be universally adapted

self-locking drive – even if the power fails, the work piece remains firmly gripped

replaceable jaws for different applications

universal jaws for quick attachment change (RL-50-GRI-02-02-E)

integrated DC motor with planetary gears


Gripper

Dimensions [mm]

Order number l1 dT
More about selected part:
myCatalog myCatalog

Technical data [mm]

  2-jaw gripper
RL-50-GRI-02-…
3-jaw gripper
RL-50-GRI-03-…
Nominal voltage 24V DC 24V DC
Control signal 24V DC 24V DC
Current draw 0,2 A 0,2 A
Control signal < 10 mA < 10 mA
DC motor output 3,6 W 3,6 W
Tensioning force 50 N 50 N
Stroke 2 x 20° 3 x 20°
Max. cycles per minute 50 50
Closing / opening time 0,5 s 0,5 s
Fitting M8x1 – 3pol M8x1 – 3pol
Protection class IP42 IP42
Weight 180 g 200 g
Material PA2200 PA2200


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302