Inquiry / Contact
igus® inc.
US(EN)
iglide® isense plain bearings indicate their wear status in good time. If a bearing needs to be changed, the system is informed about it.
System-dependent imprecision due to static force limits for travels > 150m are a thing of the past.
Now there is the new EC. PR module.
Small transmitters connected by cable are installed at 50cm intervals on the outer guide trough side links. The so-called beacons transmit their positions to a single antenna fixed to the floating moving end.
The LTE modem integrated into the separator allows direct communication with the igus® IoT cloud. Output of maintenance recommendations via web dashboard, e-mail, SMS.
Excess clearance between a chain link's bolt and hole is a clear indication of the decreasing service life of an e-chain system®. The EC. I. SU.02 sensor measures this clearance in clear percentage increments and sends it via LoRa to the icom. plus module.
No integration in IT environments, no interface issues. With the new drylin® isense linear carriage, the function and wear test is carried out simply at the push of a button.
Monday to Friday from 8 am - 8 pm
24h
