igutex® TX1 | The heavy-duty bearing up to 29007 psi- Up to 29007 psi static and 20305 psi dynamic
- Wear-resistant and dimensionally stable
- Good liquid media resistance
- Dry-running and maintenance-free
- Standard range from stock
igutex® TX1 bearings represent excellent load bearing capacity under high radial loads coupled with good abrasion resistance. The special design not only ensures excellent dimensional stability thanks to the long-fiber winding but also allows dry-running and maintenance-free operation thanks to solid lubricants. High dirt and media resistance round off the list of properties.
Typical application areasAgriculture equipmentConstruction machineryConstruction MachineryYou will find plenty of additional application areas here:
Browse all Industries When to use it?- When permanently high static loads occur
- For highly load pivoting motions
- When not only high loads but also high temperatures and media resistance are required
| When not to use?- When loads of far less than 14503 psi occur
- For rotational movements during continuous operation
- For high-temperature applications with average load levels
Use our filter options to find the most suitable product |
Tolerances and measurement systemThe installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods Assemblyiglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
Certificates and standards