Inquiry / Contact
igus® inc.
For square single and double rails as well as high profile
Efficient clamping by friction locking
Single bearings or complete carriages
| Part. No. | Mk | Vx | Kx | Vz | Kz | Dk | Holding strength, min. [N] | Tightening torque, min. [N] | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| WHKAQ-06 (1) | M6 | 1.36 | 0.85 | 0.31 | 1.1 | 0.79 | 1.18 | 0.59 | |||
| WHKA-10 (1) | M6 | 1.97 | 1.3 | 0.31 | 1.1 | 0.79 | 1.18 | 0.59 | |||
| WHKAQ-10 (1) | NEW | M6 | 1.97 | 1.3 | 0.31 | 1.1 | 0.79 | 1.18 | 0.59 | ||
| WHKAQ-16 (1) | NEW | M8 | 2.83 | 1.61 | 0.39 | 1.22 | 1.1 | 2.36 | 1.11 | ||
| WHKAQ-20 (1) | NEW | M8 | 3.54 | 2.44 | 0.39 | 1.22 | 1.1 | 2.76 | 1.11 | ||
| WHKA-10-AL (1) | M6 | 1.97 | 1.3 | 0.31 | 1.1 | 0.79 | 1.18 | 0.59 | |||
| WHKA-16 (1) | M8 | 2.83 | 1.61 | 0.39 | 1.22 | 1.1 | 2.36 | 1.11 | |||
| WHKA-16-AL (1) | M8 | 2.83 | 1.61 | 0.39 | 1.22 | 1.1 | 2.36 | 1.11 | |||
| WHKA-20 (1) | M8 | 3.54 | 2.44 | 0.39 | 1.22 | 1.1 | 2.76 | 1.11 | |||
| WHKA-20-AL (1) | M8 | 3.54 | 2.44 | 0.39 | 1.22 | 1.1 | 2.76 | 1.11 | |||
| WHKA-25 (1) | M8 | 3.78 | 2.56 | 0.47 | 1.22 | 1.1 | 2.76 | 1.11 |
(1) Requirement of dry rail surface
