Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

Assembly Instructions for System E2/000 and E2 Medium

Assembling

System E2/000 Assembly Push and click
System E2/000 Assembly Snap in pin
System E2/000 Assembly Swivel crossbars
System E2/000 Assembly Push and snap

System E2/000 Assembly Snap mounting bracket into link

System E2/000 Assembly Snap tiewrap plate into bottom groove

Separation

System E2/000 Assembly Lever crossbars
System E2/000 Assembly Swivel crossbars
System E2/000 Assembly Release side-link
System E2/000 Assembly Twist and pull apart

Filling E-Tube

System E2/000 Assembly Open: swivel lids

System E2/000 Assembly Close: push and snap

System E2/000 Assembly "Half" E-Tube: swivel crossbars
System E2/000 Assembly Remove lid: lever
System E2/000 Assembly Remove lid

System E2/000 and E2 Medium: installation video



The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302