1. Side plates in one piece 2. Ideal for high accelerations and speeds 3. Angle bracket for housing a strain relief tie wrap plate 4. Three-part design 5. Shortened as "required" 6. Accessories like shelving, strain relief available 7. Lifetime predictable 8. Hardly any polygon effect
* The required clearance height is HF = H + 1.57 in. (40 mm) (with 0.67 lbs/ft (1.0 kg/m) fill weight We request you to consult in case of especially restricted space ratios.
** The calculated length corresponds to the chain length without mounting brackets.
A = Moving end, B = Fixed end
Pitch per link: = .59” (15 mm)
Links per ft (m): = 20 (67)
For center mount applications:
Chain length = s/2 +K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG
Y-axis Additional load in kg/ft
Lower scale: Travel S in ft
FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Fast assembly times due to side plate belts
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Variant 1: Standard
Option 2: Full-width shelves
Option 3: lower shelves
29-1 Standard – for all usage situations
Separator with wide base for maximum retaining force
and good stability in e-chains®.
29-2 Quicker cable installation
Fixed on one side with wide base, narrow opposite side
for easy cable installation (easy clamping).
2300-X Horizontal division
Locks in to the vertical separator at both ends. Fixed widths
possible. Can be used as a full-width shelf for consistent
division or as a shelf for rack-like
partitioning on 3 levels.
2. Full-width shelves
Strain relief tiewrap plate or strain relief with C rails can be locked in the last chain link.
Data protection declaration