igubal® rod end with female thread, KCLM, mm

​ igubal® rod end bearing with female thread
 
igubal® rod ends are corrosion-resistant can be used without problems in harsh environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt and dust should be noted.
 
Housing made from igumid G, an extremely impact-resistant, long-fiber-reinforced polymer. Suitable for temperatures from -40°F to +194°F in long-term use.

• Maintenance-free dry operation
• Extremely cost-effective
• No external lubrication
• Heavy-duty
• Very high durability in varying loads
• Compensation of misalignment errors
• Compensation of edge loads
• Resistant to dirt, dust and lint
• Resistant to corrosion and chemicals
• Can be used in liquid media
• High vibration-dampening
• Suitable for rotating, oscillating and linear movements
• Inner rings set in housings with very low clearance
• Very lightweight

Typical application areas

• Bicycle manufacturing
• Plant construction
• Packaging
• Offshore
   
  You will find plenty of additional application areas here: Industry sector solutions Industry solutions

When to use it? If you want to save weight For rotating, oscillating and linear movements If high-frequency oscillations/vibrations occur If low-noise operation is required If you need an electrically insulating part If corrosion resistance is required In combination with pneumatic cylinders and gas struts If chemical resistance is required If heavy-duty is required

When not to use it? If temperatures are higher than +194°F If rotation speeds higher than 0.5 m/s are required If very high tensile and axial forces occur When applications with hydraulic cylinders are planned If diameters above 30 mm are required Use our filter options to find the suitable product

Tolerances
The igubal® bearing elements can be used with different tolerances according to each application. They are designed with a large bearing clearance in the standard product, which enables secure operation even under high peripheral speeds. The bore of the inner ring is produced to a standard tolerance range E10. Shafts should also meet recommended tolerances h6 and h9. Check the inner diameter (igubal)
 
Coefficients of sliding friction and speed
 
One important advantage of maintenance-free igubal® spherical bearings is that rapid, rotary movements of a mounted shaft take place directly in the spherical portion, made from iglide® materials. The benefit of this plastic/steel plain bearing arrangement is that high speeds are possible even in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. In contrast, angular movements of the spherical bearings take place at the spherical outer diameter of the spherical ball. The maintenance-free igubal® bearing elements also permit linear movements of the shaft.
 
Chemical resistance of igubal® bearings
 
The housing made of igumid G is resistant to weak alkalines, weak acids and fuels, as well as all types of lubricants. The moisture absorption of igubal® spherical bearings is approximately 1.3% of its regular weight in standard environments. The saturation limit submerged in water is 6.5%. This must be taken into consideration in light of the prevailing environmental conditions. If a lower moisture absorption is required, it is worthwhile having a look at the various materials available.
 
UV resistance
 
The corrosion resistance of igubal® bearings is of special value for outdoor applications. igubal® bearings are permanently resistant to UV radiation. A small change in color (dark coloration) of the spherical ball due to UV radiation and other weathering does not affect the mechanical, electrical or thermal properties.​