Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

drylin® T Linear Guide Rails & Carriages

The dimensions of the drylin® T linear rail guides and carriages are the same as the usual recirculating ball bearing guides. They are available in seven installation sizes, and users have the choice between three different carriage options: with manually or automatically adjustable clearance or an extremely robust heavy-duty version. The sliding elements are secure within the carriage body, especially suited when pulling down from the rail. The drylin® T carriage guides can handle loads up to 14,000 N, have a service life of up to 50,000 km and are extremely dirt-resistant. The connector and hole dimensions for drylin® T rail guides and carriages are identical with almost any other linear guide and carriage manufacturer. Only available in metric measurements

Number of products: 19

drylin® T Miniature Guide Rail

  • Hard anodized aluminum
  • Sizes 07/09/12/15mm (mounting-base width)
  • Available up to 2000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 82.28 USD/m
8 variants ready for shipping:
4 variants within 24 hours
Shop now

drylin® T Miniature Carriage

  • For drylin® Miniature guide rails  07/09/12/15mm (mounting-base width)
  • Zinc carriage with iglide® J or J200 liner material (size-dependent)
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 19.55 USD/Pc.
14 variants ready for shipping:
10 variants within 24 hours
1 variants within 12 working days
Shop now

drylin® T Miniature Adjustable Carriage

  • For drylin® Miniature guide rails sizes 12mm and 15mm (mounting-base width)
  • Black zinc carriage with iglide® J liner material 
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
  • For reducing or increasing the clearance between the carriage and guide rail
from 36.52 USD/Pc.
2 variants ready for shipping:
2 variants within 24 hours
Shop now

drylin® T Standard Guide Rail

  • Hard anodized aluminum
  • Sizes 15/20/25/30mm (guide width)
  • Available up to 4000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 78.86 USD/m
8 variants ready for shipping:
8 variants within 24 hours
Shop now

drylin® T Clear Anodized, No-Hole Standard Guide Rail, Clear Anodized

  • Clear anodized aluminum
  • Sizes 15/20/25/30mm (guide width)
  • Available up to 4000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
Upon request
Shop now

drylin® T Lightweight Hollow Standard Guide Rail

  • Clear anodized aluminum
  • Size 20mm  (guide width) Only
  • Available up t0 4000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 88.40 USD/m
2 variants ready for shipping:
1 variants within 24 hours
Shop now

drylin® T Standard Carriage

  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Adjustable bearing clearance
  • Aluminum housing with iglide® J liner material, plastic end caps.
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 45.33 USD/Pc.
12 variants ready for shipping:
8 variants within 24 hours
4 variants within 12 working days
Shop now

drylin® T Standard Carriage with Automatic Clearance Reduction

  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Automatically adjusts for reduced bearing clearance by removal of red pins (after assembly on guide rail)
  • Aluminum housing with iglide® J liner material, plastic end caps. Red pins removed after assembly to guide rail
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 45.33 USD/Pc.
12 variants ready for shipping:
11 variants within 24 hours
1 variants within 12 working days
Shop now

drylin® T Standard Carriage with Hand Clamp

  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Adjustable bearing clearance
  • Aluminum housing with iglide® J liner material, plastic end caps.
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
  • For manual, light-duty clamping applications
from 51.76 USD/Pc.
8 variants ready for shipping:
5 variants within 24 hours
3 variants within 12 working days
Shop now

drylin® T Heavy-Duty Standard Carriage with Adjustable Clearance

  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Adjustable bearing clearance
  • Durable all-aluminum housing with optimized iglide® J200 liner material
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 65.59 USD/Pc.
12 variants ready for shipping:
4 variants within 24 hours
Shop now

drylin® T Heavy-Duty Carriage Standard Carriage without Adjustable Clearance

  • For drylin® Standard guide rail 20mm (guide width)
  • Set bearing clearance
  • Durable all-aluminum housing with iglide® J liner material
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
from 59.03 USD/Pc.
9 variants ready for shipping:
8 variants within 24 hours
1 variants within 12 working days
Shop now

drylin® T Heavy-Duty Compact Carriage without Adjustable Clearance

  • For drylin® Standard guide rails  20mm (guide widths)
  • Set bearing clearance
  • Durable all-aluminum housing with iglide® J liner material
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
  • *TW-03-25 carriages run on rail part # TS-01-20
from 76.29 USD/Pc.
3 variants ready for shipping:
3 variants within 24 hours
Shop now

drylin® T Compact Manual Clamp

  • For drylin® Standard guide rails  15/20/25/30mm 
  • For use in conjunction with drylin® Standard carriages 15/20/25/30mm 
  • Clamping forces up to 180-500N (depending on size)
from 285.48 USD/Pc.
4 variants ready for shipping:
3 variants within 24 hours
1 variants within 12 working days
Shop now

drylin® T Brass Clamp

  • For drylin® Standard guide rail size 25mm 
  • For use with in conjuntion with drylin® Standard carriages size 25 
  • Clamping force 500N
from 282.17 USD/Pc.
1 variants ready for shipping:
1 variants within 24 hours
Shop now

drylin® T rail guide with carriage

  • Sliding carriage with manually adjustable clearance
  • Maintenance-free, dry operation
  • Corrosion resistant
  • Hard-anodized aluminum rails
  • Standard bore pattern symmetrical C5 = C6
Upon request
Shop now

Application Assistance

For further questions or product information, please contact:

Photo
Matt Mowry

drylin® Product Manager

Email

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH