Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

drylin® T Linear Guide Rails & Carriages

The dimensions of the drylin® T rail guides are the same as the usual recirculating ball bearing guides. They are available in seven installation sizes - users have the choice between three different carriage options: with manually or automatically adjustable clearance or an extremely robust heavy-duty version. The sliding elements are secure within the carriage body, especially suited when pulling down from the rail. The drylin® T carriage guides can handle loads up to 14,000 N, have a service life of up to 50,000 km and are extremely dirt-resistant.
 
The drylin® T rail guide are identical with regard to connector and hole dimensions:
  • INA: KUVE -B • KWVE-B • KWE-B • KWSE / KUSE
  • Bosch Rexroth: FNS • FLS • SNS • SLSS • NH • SLH • FNN • SNN
  • THK: SHS-C/LC • HSR-A/LA • HSR-B/LB/BM
  • Hiwin: HGW-CC • QHW-CC • RGW-CC • RGW-HC
  • Rollon: MRS • MRS-L IKO: MRS • MRS-L
  • Rodriguez: BRH-A • BRH-AL • MSR-E • MSR-LE
  • Romani: HRC-FN 

Products

Number of products: 21

drylin® T Miniature Guide Rail
  • Hard anodized aluminum
  • Sizes 07/09/12/15mm (mounting-base width)
  • Available up to 2000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 63.99 USD/m

8 items, ready for shipping:
2 in 24 - 48 hours
Shop now
drylin® T Miniature Carriage
  • For drylin® Miniature guide rails  07/09/12/15mm (mounting-base width)
  • Zinc carriage with iglide® J or J200 liner material (size-dependent)
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 15.20 USD/Pc.

14 items, ready for shipping:
5 in 24 hours
5 in 24 - 48 hours
Shop now
drylin® T Miniature Adjustable Carriage
  • For drylin® Miniature guide rails sizes 12mm and 15mm (mounting-base width)
  • Black zinc carriage with iglide® J liner material 
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
  • For reducing or increasing the clearance between the carriage and guide rail

from 28.41 USD/Pc.

2 items, ready for shipping:
2 in 24 hours
Shop now
drylin® T Standard Guide Rail
  • Hard anodized aluminum
  • Sizes 15/20/25/30mm (guide width)
  • Available up to 4000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 61.33 USD/m

8 items, ready for shipping:
8 in 24 - 48 hours
Shop now
drylin® T Clear Anodized, No-Hole Standard Guide Rail, Clear Anodized
  • Clear anodized aluminum
  • Sizes 15/20/25/30mm (guide width)
  • Available up to 4000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

Upon request

Shop now
drylin® T Lightweight Hollow Standard Guide Rail
  • Clear anodized aluminum
  • Size 20mm  (guide width) Only
  • Available up t0 4000mm lengths
  • No cutting charge for standard lengths and tolerances
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 68.75 USD/m

2 items, ready for shipping:
1 in 24 - 48 hours
Shop now
drylin® T Standard Carriage
  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Adjustable bearing clearance
  • Aluminum housing with iglide® J liner material, plastic end caps.
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 35.25 USD/Pc.

12 items, ready for shipping:
1 in 24 hours
11 in 24 - 48 hours
Shop now
drylin® T Standard Carriage with Automatic Clearance Reduction
  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Automatically adjusts for reduced bearing clearance by removal of red pins (after assembly on guide rail)
  • Aluminum housing with iglide® J liner material, plastic end caps. Red pins removed after assembly to guide rail
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 35.25 USD/Pc.

12 items, ready for shipping:
1 in 24 hours
11 in 24 - 48 hours
Shop now
drylin® T Standard Carriage with Hand Clamp
  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Adjustable bearing clearance
  • Aluminum housing with iglide® J liner material, plastic end caps.
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides
  • For manual, light-duty clamping applications

from 40.25 USD/Pc.

8 items, ready for shipping:
7 in 24 - 48 hours
Shop now
drylin® T Heavy-Duty Standard Carriage with Adjustable Clearance
  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Adjustable bearing clearance
  • Durable all-aluminum housing with optimized iglide® J200 liner material
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 51.01 USD/Pc.

4 items, ready for shipping:
3 in 24 - 48 hours
Shop now
drylin® T Heavy-Duty Carriage Standard Carriage without Adjustable Clearance
  • For drylin® Standard guide rail 20mm (guide width)
  • Set bearing clearance
  • Durable all-aluminum housing with iglide® J liner material
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 45.91 USD/Pc.

9 items, ready for shipping:
2 in 24 hours
7 in 24 - 48 hours
Shop now
drylin® T Heavy-Duty Compact Carriage without Adjustable Clearance
  • For drylin® Standard guide rails  15/20/25/30mm (guide widths)
  • Set bearing clearance
  • Durable all-aluminum housing with iglide® J liner material
  • Assembled rail and carriages are dimensionally interchangeable with recirculating ball bearing guides

from 59.33 USD/Pc.

3 items, ready for shipping:
2 in 24 hours
1 in 24 - 48 hours
Shop now
drylin® T Compact Manual Clamp
  • For drylin® Standard guide rails  15/20/25/30mm 
  • For use in conjunction with drylin® Standard carriages 15/20/25/30mm 
  • Clamping forces up to 180-500N (depending on size)

from 222.03 USD/Pc.

4 items, ready for shipping:
3 in 24 hours
1 in 24 - 48 hours
Shop now
drylin® T Brass Clamp
  • For drylin® Standard guide rail size 25mm 
  • For use with in conjuntion with drylin® Standard carriages size 25 
  • Clamping force 500N

from 219.45 USD/Pc.

1 items, ready for shipping:
1 in 24 hours
Shop now

Application Assistance

For further questions or product information, please contact:

Photo
Matt Mowry

drylin® Product Manager

Email

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h