1.KMA-mounting brackets2.Mounting brackets, locking or pivoting form3.R77: Swivelable and removable lid4.R77: Removable bottom lids5.Combinable tube and chain6.Strain relief integratable in AE7.28/29: Removable crossbars on both sides
Inner widths Bi: 1.97 up to 11.81 (50 - 300 mm)Bending radii R: 3.94 up to 11.81 (100 - 300 mm)Pitch: 2.2 (56 mm) per link = 6 links/ft (18/m)
* The required installation clearance is HF = H + 1.57 (40 mm) (in the case of 1.34 lbs/ft (2 kg/m) additional load) If extremely restricted space is available, please consult us.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving End , B=Fixed EndPitch: 2.2 (56 mm) per linkLinks per ft: 6 (18/m)Travel: SChain length = S/2 + K
Dependency of the unsupported length on the additional loadX axis: Unsupported length in ft FLB/FLGY axis: Additional load in lbs/ftLower scale: Length of travel S in ftFLB = unsupported with permissible sagFLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Extension links are available for widening
KMA mounting brackets are available
Steel mounting brackets steel are available
10 widths and 8 bending radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Separators can be positioned at any point in the chain cross-section. The standard separator part no. 281 acts as a secure support by virtue of its wide base, even in the case of thick and cables/hoses Separator part no. 281-14 can be used to increase the spacing between the separators. Additionally available for applications with energy tubes: Separator part no. 281T. It is mounted on one side on the floor of the energy tube. The connection to the lid is loose to allow easy opening of the energy tube.
The various elements of the interior separation kit allow vertical as well as horizontal division of the Energy Chains® and tubes Side-plates and shelves form the basic framework of a rack system. On a height grid of 0.28 (7 mm), shelves of different widths can be arranged in 3 stages. Assignments are recommended in the chapter titled "Design specifications". During installation of the "open" slotted separator, the uppermost and lowermost "grid levels" cannot be occupied by a shelf. For special applications: Separators with integrated shelf Examples of interior separation: Slotted separator Art. No. 297 which is open on one side can be post-integrated into existing interior-separation systems without the need for dismantling them beforehand (does not apply to shelves at be uppermost or lowermost grid levels).
1. Option 1 KMA "pivoting"
2. Option 2 KMA "locking"
3. Option 3 "steel"
Guide trough "Super-Alu", "Basic"
Guide trough "Super-Alu", "Heavy Duty"
Guide troughs made of steel
1. Trough side parts, aluminum, 6.56 ft (2 m)
2. Glide bar, plastic, 6.56 ft (2 m)
3. Glide strips*, plastic, 6.56 ft (2 m)
4. Bottom clamp, aluminum
5. C-profile, steel galvanized
6. Screw M6 x 16
7. Sliding nut M6
8. Interface connector, plastic
*without glide strips on request
Aluminum "Super Trough"- the igus® standard
The Aluminum "SuperTrough" is a modular guide trough system for long travels (when E-Chains® glide on themselves, as per sketch). Aluminum
"SuperTrough" is available in low cost "basic versions" and can be upgraded for heavy duty applications. This universal usage makes it the
igus® recommended new standard trough system.
1. Interface connector
2. Polymer glide bar
3. Bottom clamp
4. Glide strip
9. Bracket "Heavy Duty"
10. Silencer profile, rubber
11. Screw M6 x 20
1. Aluminium profile
3. Heavy Duty bracket
6. Silencer profile
1. Guide trough (blue)2. Glide bar (black)3. Assembly set (red)4. Individual fastening without C-profile5. Length of profile rail
+ Easy assembly with installation sets+ 2-part design - adaptable to chain widths+ Very stable+ Economical+ Large selection
Guide trough without glide bars part no. 97-30, guide trough with glide bars part no. 97-31
Installation sets as a joint connection part no. 97-50. XX
Data protection declaration