iglide® A500 polymer sleeve bearing, metric

iglide® A500 | The endurance runner at higher temperatures in the food sector

PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.

• Compliant with EC directive 10/2011 EC
• FDA-compliant
• Temperature resistant from -212 °F to +482 °F
• High chemical resistance
• Dry-running and maintenance-free
• Standard range from stock

iglide® A500 bearings are permitted for direct contact with foodstuffs. They exhibit an exceptionally good chemical resistance and are suitable for heavy-duty use in machinery for the food industry. Though iglide® A500 is an extremely soft material, it simultaneously possesses an excellent compressive strength even at high temperatures.
 

When to use it? When FDA compliance is required When a high chemical resistance is required When good abrasion resistance is required Temperature resistant from -212 °F to +482 °F

When not to use? When the highest wear resistance is required When a cost-effective universal bearing is required

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: the thicker the bearings are, the larger the tolerances must be.
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.