Installation & Inspection Services - Learn More

Explore our robotics marketplace

Help us Improve - Give us Your Feedback

myigus

Shopping Cart

(0)

Inquiry / Contact

igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747

+1 401 438 7270

Contact an expert

Request a quote

US(EN)

iglide® plastic plain bearings with UL94 V0 rating

Does not burn… UL V0

The new material achieves the UL94 V0 rating and is therefore ideally suited for applications with stringent fire protection regulations (vehicle interiors, building interior systems, etc.). Other properties are similar to our general purpose iglide® G300.

Self-lubricating- and maintenance-free

UL94 V0 rating

High wear-resistance

Universal applicability

Application areas: Interiors of aircraft's, vehicles, railroad compartments, buildings (elevators, escalators, etc.)

General features
Density	1,53 g/cm3
Color	black
Max. moisture absorption at 73 °F and 50 %r.h.	0.7 Wt.-%
Max. water absorption	4,0 Wt.-%

Mechanical properties
Max. permissible static surface pressure (+68 °F)	10,880 psi
Shore D hardness	80

Physical and thermal properties
Upper long-term application temperature	266 °F
Upper short-term application temperature	410 °F
Lower application temperature	-40 °F

Electrical properties
Surface resistance	>10¹¹ Ω

Chamfer depending on d1

d1 [mm]	f [mm]
Ø 1-6	0,3
Ø 1-6	0,5
Ø 1-6	0,8
Ø > 30	1,2

Dimensions according to ISO 3547-1 and special dimensions

iglide® G V0, type S

Shaft diameter d1 [inch]:

Bearing, cylindrical [mm]

Ordering number	d1	d1-tolerance*		d2	b1
		Min.	Max.
GV0SM-0608-06 ⁽¹⁾	6	0,02		8	6	Upon request
GV0SM-0810-10 ⁽¹⁾	8	0,025		10	10	Upon request
GV0SM-1012-08	10	+0,025		12	8	Upon request
GV0SM-1012-09	10	+0,025		12	9	Upon request
GV0SM-1012-10 ⁽¹⁾	10	0,025		12	10	Upon request
GV0SM-1012-15	10	+0,025		12	15	Upon request
GV0SM-1012-17	10	+0,025		12	17	Upon request
GV0SM-1214-12 ⁽¹⁾	12	0,032		14	12	Upon request
GV0SM-1618-15 ⁽¹⁾	16	0,032		18	15	Upon request
GV0SM-2023-20 ⁽¹⁾	20	0,04		23	20	Upon request
GV0SM-2528-20 ⁽¹⁾	25	0,04		28	20	Upon request
GV0SM-3034-30 ⁽¹⁾	30	0,04		34	30	Upon request
GV0SM-3539-40 ⁽¹⁾	35	0,05		39	40	Upon request
GV0SM-4044-40 ⁽¹⁾	40	0,05		44	40	Upon request

More about selected part:

3D-CAD

Sample request

PDF

Quote request

myCatalog

* After pressfit of the bearing in a housing with nominal dimension, the inner diameter of the bearings adjusts itself to an F10 tolerance.
(1) The specified d1 tolerance adjusts itself after press fit into housing bore. Test method

iglide® G V0, type F

Shaft diameter d1 [inch]:

bearing with flange [mm]

Ordering number	d1	d1-tolerance*		d2	d3	b1	b2
		Min.	Max.
GV0FM-0608-06	6	+0,02		8	12	6	1	Upon request
GV0FM-0810-10	8	+0,025		10	15	10	1	Upon request
GV0FM-1012-10	10	+0,025		12	18	10	1	Upon request
GV0FM-1214-12	12	+0,032		14	20	12	1	Upon request
GV0FM-1618-17	16	+0,032		18	24	17	1	3.49 USD
GV0FM-2023-21	20	+0,040		23	30	21.5	1.5	Upon request
GV0FM-2528-21	25	+0,040		28	35	21	1.5	Upon request
GV0FM-3034-37	30	+0,040		34	42	37	2	Upon request
GV0FM-3539-36	35	+0,050		39	47	36	2	Upon request
GV0FM-4044-40	40	+0,050		44	52	40	2	Upon request