We are hiring! Set your career in motion!
Apply today!
myigus
Shopping Cart
(0)
Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
Send message
Contact an igus expert
Request a quote
US(EN)
Menu
  1. Home
  2. Actuators, Motors & Controllers
  3. Electric motors
  4. Stepper Motors
  5. drylin® E stepper motor with stranded wire, NEMA 23

drylin® E stepper motor with stranded wire, NEMA 23

  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: strands and encoder, JST connector

Unsure whether it fits?

Download CAD files
Expert system motor

Expert system motor

The right drylin E motor in just a few clicks. Simply enter your requirements and receive suitable suggestions.
Product description
NEMA23: The best known stepper motor size
 
Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads.
 
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
 
Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.
 
Certificates and standards
CE EMV guideline
Technical data
Downloads

Other solutions

Claw coupling for lead screw drives
Claw coupling for lead screw drives

Vibration damping and easy fitting

from 49.21 USD/Pc.
Claw coupling for belt-drive systems
Claw coupling for belt-drive systems

Vibration damping and easy fitting

from 38.05 USD/Pc.
drylin® D1 motor control system for stepper, DC and EC/BLDC motors
drylin® D1 motor control system for stepper, DC and EC/BLDC motors

Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V

from 486.00 USD/Pc.
Motor flange for lead screw drives
Motor flange for lead screw drives

Suitable for igus® coupling

from 34.56 USD/Pc.
chainflex® Connection cable straight M12 x 1, CF.INI CF9
chainflex® Connection cable straight M12 x 1, CF.INI CF9

Socket at the cable front, cable ends cut

from 15.61 USD/Pc.
chainflex® Connection cable angled M12 x 1, CF.INI CF9
chainflex® Connection cable angled M12 x 1, CF.INI CF9

Socket at the cable front, cable ends cut

from 15.70 USD/Pc.
External braking resistors (power class 50/75/100 W) for EC/BLDC motors
External braking resistors (power class 50/75/100 W) for EC/BLDC motors

NEMA17-34

Upon request

Application Assistance

Photo
Matt Mowry

drylin® Product Manager

+1 800 521 2747
Email

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h