Shop thrust washers

Find the right igus thrust washer for your application quickly and easily in our online shop.

Enter dimensions, environmental parameters and other operating conditions in the filter: you will receive an overview of suitable igus catalogue items and customized thrust washers with immediate price indication.

You will also be shown the service life of our durable thrust washers based on your information.

Sleeve bearings (S)
Flanged bearings (F)
Clearance-free pre-loaded bearings (VS)
Clearance-free pre-loaded bearing with flange (VF)
Thrust washers (T)
Disc springs (TE)
Piston rings (PR)
Clip bearings (C)
Split bearings (Y)
Split bearings with anti-rotation feature (Y-K)
Easy clips (EC)
Clip-in double flange bearing (D)
Double flanged bearings (K)
Two-bolt flange bearings (FL)
Pre-loaded two-bolt flange bearings (VFL)
Flanged bearing and felt seal (FSG)

Search and configuration
By entering geometry data, suitable plain bearings can be found or individually configured as special parts.
Note: Without complete geometry data, the search only takes place in the catalogue parts. Special parts and their service life can only be calculated and displayed once all the necessary geometry data has been entered in full.
Metricimperial
Inner diameter mm (d1)
mm
Outer diameter (d2)
mm
Bearing width (s)
mm

The igus service life promise:
igus® SE & Co. KG grants purchasers of motion plastics products with an igus service life calculation a guarantee of up to 4 years from delivery. This applies to the calculated number of movement cycles or service hours according to the igus online service life calculator. With this guarantee, igus offers free replacement within the specified guarantee periods from the date of handover (delivery ex works): Guarantee of up to 4 years on igus products
Metricimperial
igus-icon-infoThis setting only affects the calculation of the service life. All other units follow the unit system defined in "Dimensions".
Environment
Environmentigus-icon-info-circle-gray
dry
Temperatureigus-icon-info-circle-gray
23 °C
Bearing load
N
Permitted wear
mm
Shaft material
Case Hardened Steel / AISI 1050
Type of operation
Movement time per hour
min
Type of movement
Speedigus-icon-info-circle-gray
r/min
igus-icon-close-crossRestore defaults

Choose from 152 suitable offers

Quantity

(0 active)

Filter products

Temperature range

°C

Food sectorFDA complianceEU 10/2011

EnvironmentDirt and dustLow total moisture absorptionChemicalsUnderwater / splash water

Electrical propertiesElectrically conductive

Surface pressure

MPa

Quantity

iglide® J

JTM-0512-010

Injection molding

USD 0.76 / pc.

Delivery time:

2 Days

Service life:

142,393 h

Dimensions:

5.30

12.00

iglide® J

JTM-0512-020

Injection molding

USD 0.85 / pc.

Delivery time:

2 Days

Service life:

154,957 h

Dimensions:

5.00

12.00

iglide® J

JTM-0615-015

Injection molding

USD 0.91 / pc.

Delivery time:

2 Days

Service life:

205,092 h

Dimensions:

6.00

15.00

iglide® G

GTM-0408-005

Injection molding

USD 0.93 / pc.

Delivery time:

2 Days

Service life:

27,690 h

Dimensions:

4.00

8.00

iglide® G

GTM-0509-006

Injection molding

USD 0.97 / pc.

Delivery time:

2 Days

Service life:

35,429 h

Dimensions:

5.00

9.50

iglide® J

JTM-1224-015

Injection molding

USD 1.02 / pc.

Delivery time:

2 Days

Service life:

234,379 h

Dimensions:

12.00

24.00

18.00

1.50

iglide® W300

WTM-0509-006

Injection molding

USD 1.05 / pc.

Delivery time:

2 Days

Service life:

109,166 h

Dimensions:

5.00

9.50

iglide® G

GTM-0410-005

Injection molding

USD 1.06 / pc.

Delivery time:

2 Days

Service life:

70,535 h

Dimensions:

4.00

10.00

iglide® G

GTM-1018-005

Injection molding

USD 1.08 / pc.

Delivery time:

2 Days

Service life:

97,226 h

Dimensions:

10.00

18.00

iglide® W300

WTM-0818-015

Injection molding

USD 1.11 / pc.

Delivery time:

2 Days

Service life:

211,594 h

Dimensions:

8.00

18.00

13.00

1.50

iglide® G

GTM-0913-010

Injection molding

USD 1.12 / pc.

Delivery time:

2 Days

Service life:

30,945 h

Dimensions:

9.20

13.00

iglide® G

GTM-0411-005

Injection molding

USD 1.13 / pc.

Delivery time:

2 Days

Service life:

113,950 h

Dimensions:

4.00

11.00

iglide® W300

WTM-1018-015

Injection molding

USD 1.16 / pc.

Delivery time:

2 Days

Service life:

145,839 h

Dimensions:

10.00

18.00

iglide® G

GTM-0612-015

Injection molding

USD 1.18 / pc.

Delivery time:

2 Days

Service life:

78,128 h

Dimensions:

6.00

12.00

iglide® G

GTM-0615-010

Injection molding

USD 1.18 / pc.

Delivery time:

2 Days

Service life:

136,728 h

Dimensions:

6.00

15.00

iglide® G

GTM-0615-015

Injection molding

USD 1.18 / pc.

Delivery time:

2 Days

Service life:

136,728 h

Dimensions:

6.00

15.00

iglide® G

GTM-0815-015

Injection molding

USD 1.18 / pc.

Delivery time:

2 Days

Service life:

87,353 h

Dimensions:

8.00

15.00

iglide® G

GTM-1018-010

Injection molding

USD 1.18 / pc.

Delivery time:

2 Days

Service life:

97,226 h

Dimensions:

10.00

18.00

iglide® J

JTM-1018-010

Injection molding

USD 1.18 / pc.

Delivery time:

2 Days

Service life:

145,839 h

Dimensions:

10.00

18.00

iglide® G

GTM-0712-005

Injection molding

USD 1.25 / pc.

Delivery time:

2 Days

Service life:

52,958 h

Dimensions:

7.00

12.00

iglide® G

GTM-0620-015

Injection molding

USD 1.26 / pc.

Delivery time:

25 Days

Service life:

263,323 h

Dimensions:

6.00

20.00

13.00

1.50

iglide® G

GTM-0713-005

Injection molding

USD 1.26 / pc.

Delivery time:

2 Days

Service life:

74,411 h

Dimensions:

7.00

13.00

iglide® G

GTM-0918-015

Injection molding

USD 1.26 / pc.

Delivery time:

2 Days

Service life:

117,191 h

Dimensions:

9.00

18.00

13.50

1.50

iglide® W300

WTM-1630-015

Injection molding

USD 1.32 / pc.

Delivery time:

2 Days

Service life:

262,049 h

Dimensions:

16.00

30.00

23.00

2.00

iglide® G

GTM-0611-010

Injection molding

USD 1.35 / pc.

Delivery time:

2 Days

Service life:

43,925 h

Dimensions:

6.20

11.00

iglide® G

GTM-0815-005

Injection molding

USD 1.35 / pc.

Delivery time:

2 Days

Service life:

87,353 h

Dimensions:

8.00

15.00

iglide® G

GTM-14175-010

Injection molding

USD 1.38 / pc.

Delivery time:

2 Days

Service life:

34,181 h

Dimensions:

14.00

17.50

iglide® G

GTM-0818-010

Injection molding

USD 1.43 / pc.

Delivery time:

2 Days

Service life:

141,063 h

Dimensions:

8.00

18.00

iglide® G

GTM-0818-015

Injection molding

USD 1.43 / pc.

Delivery time:

2 Days

Service life:

141,063 h

Dimensions:

8.00

18.00

13.00

1.50

iglide® G

GTM-1018-020

Injection molding

USD 1.43 / pc.

Delivery time:

2 Days

Service life:

97,226 h

Dimensions:

10.00

18.00

Material igus-icon-arrow-table-sorting	Dimensions (mm) igus-icon-chevron-left d1 igus-icon-arrow-table-sorting d2 igus-icon-arrow-table-sorting d4 igus-icon-arrow-table-sorting d5 igus-icon-arrow-table-sorting d6 igus-icon-arrow-table-sorting igus-icon-chevron-right	Delivery time igus-icon-arrow-table-sorting	Service life igus-icon-info-circle-gray igus-icon-arrow-table-sorting	Price / pc. igus-icon-arrow-table-sorting	igus-icon-check-box-outline-blank
Material igus-icon-arrow-table-sorting	Dimensions (mm) igus-icon-chevron-left d1 igus-icon-arrow-table-sorting d2 igus-icon-arrow-table-sorting d4 igus-icon-arrow-table-sorting d5 igus-icon-arrow-table-sorting d6 igus-icon-arrow-table-sorting igus-icon-chevron-right	Delivery time / Service life igus-icon-info-circle-gray igus-icon-arrow-table-sorting		Price / pc. igus-icon-arrow-table-sorting	igus-icon-check-box-outline-blank
iglide® J JTM-0512-010 Injection molding	5.30 12.00 - - -	2 Days	2 Days / 142,393 h		142,393 h	USD 0.76
iglide® J JTM-0512-020 Injection molding	5.00 12.00 - - -	2 Days	2 Days / 154,957 h		154,957 h	USD 0.85
iglide® J JTM-0615-015 Injection molding	6.00 15.00 - - -	2 Days	2 Days / 205,092 h		205,092 h	USD 0.91
iglide® G GTM-0408-005 Injection molding	4.00 8.00 - - 8.00	2 Days	2 Days / 27,690 h		27,690 h	USD 0.93
iglide® G GTM-0509-006 Injection molding	5.00 9.50 - - -	2 Days	2 Days / 35,429 h		35,429 h	USD 0.97
iglide® J JTM-1224-015 Injection molding	12.00 24.00 18.00 1.50 -	2 Days	2 Days / 234,379 h		234,379 h	USD 1.02
iglide® W300 WTM-0509-006 (FORMERLY LTM-0509-006) Injection molding	5.00 9.50 - - -	2 Days	2 Days / 109,166 h		109,166 h	USD 1.05
iglide® G GTM-0410-005 Injection molding	4.00 10.00 - - -	2 Days	2 Days / 70,535 h		70,535 h	USD 1.06
iglide® G GTM-1018-005 Injection molding	10.00 18.00 - - -	2 Days	2 Days / 97,226 h		97,226 h	USD 1.08
iglide® W300 WTM-0818-015 (FORMERLY LTM-0818-015) Injection molding	8.00 18.00 13.00 1.50 -	2 Days	2 Days / 211,594 h		211,594 h	USD 1.11
iglide® G GTM-0913-010 Injection molding	9.20 13.00 - - -	2 Days	2 Days / 30,945 h		30,945 h	USD 1.12
iglide® G GTM-0411-005 Injection molding	4.00 11.00 - - -	2 Days	2 Days / 113,950 h		113,950 h	USD 1.13
iglide® W300 WTM-1018-015 (FORMERLY LTM-1018-015) Injection molding	10.00 18.00 - - -	2 Days	2 Days / 145,839 h		145,839 h	USD 1.16
iglide® G GTM-0612-015 Injection molding	6.00 12.00 - - -	2 Days	2 Days / 78,128 h		78,128 h	USD 1.18
iglide® G GTM-0615-010 Injection molding	6.00 15.00 - - -	2 Days	2 Days / 136,728 h		136,728 h	USD 1.18
iglide® G GTM-0615-015 Injection molding	6.00 15.00 - - -	2 Days	2 Days / 136,728 h		136,728 h	USD 1.18
iglide® G GTM-0815-015 Injection molding	8.00 15.00 - - -	2 Days	2 Days / 87,353 h		87,353 h	USD 1.18
iglide® G GTM-1018-010 Injection molding	10.00 18.00 - - -	2 Days	2 Days / 97,226 h		97,226 h	USD 1.18
iglide® J JTM-1018-010 Injection molding	10.00 18.00 - - -	2 Days	2 Days / 145,839 h		145,839 h	USD 1.18
iglide® G GTM-0712-005 Injection molding	7.00 12.00 - - -	2 Days	2 Days / 52,958 h		52,958 h	USD 1.25
iglide® G GTM-0620-015 Injection molding	6.00 20.00 13.00 1.50 -	25 Days	25 Days / 263,323 h		263,323 h	USD 1.26
iglide® G GTM-0713-005 Injection molding	7.00 13.00 - - -	2 Days	2 Days / 74,411 h		74,411 h	USD 1.26
iglide® G GTM-0918-015 Injection molding	9.00 18.00 13.50 1.50 -	2 Days	2 Days / 117,191 h		117,191 h	USD 1.26
iglide® W300 WTM-1630-015 (FORMERLY LTM-1630-015) Injection molding	16.00 30.00 23.00 2.00 -	2 Days	2 Days / 262,049 h		262,049 h	USD 1.32
iglide® G GTM-0611-010 Injection molding	6.20 11.00 - - -	2 Days	2 Days / 43,925 h		43,925 h	USD 1.35
iglide® G GTM-0815-005 Injection molding	8.00 15.00 - - -	2 Days	2 Days / 87,353 h		87,353 h	USD 1.35
iglide® G GTM-14175-010 Injection molding	14.00 17.50 - - -	2 Days	2 Days / 34,181 h		34,181 h	USD 1.38
iglide® G GTM-0818-010 Injection molding	8.00 18.00 - - -	2 Days	2 Days / 141,063 h		141,063 h	USD 1.43
iglide® G GTM-0818-015 Injection molding	8.00 18.00 13.00 1.50 -	2 Days	2 Days / 141,063 h		141,063 h	USD 1.43
iglide® G GTM-1018-020 Injection molding	10.00 18.00 - - -	2 Days	2 Days / 97,226 h		97,226 h	USD 1.43