1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: J350SM-0405-04
- Material: iglide® J350
- Shape: Sleeve bearings
- Dimensions:
- d1 4 mm
- d2 5.5 mm
- b1 4 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for the 96 PFAS substances considered critical for the environment and health using the SQP M1227 test method (LC-MS/MS and GC-MS) and do not contain any substances >0.1% by mass. This category excludes substances from the group of fluoropolymers.
- Endurance runner with high dimensional stability at high temperature - Can be used with many kind of shafts and loads
- Excellent coefficient of friction against steel
- Continuous service temperature up to +356°F
- For medium and high loads
iglidur® J350 | Endurance runner with high dimensional stability under temperature - can be used with many shafts and load collectives
A superior material for rotary applications - and that on many different steel shafts. With iglidur® J350, the service life can often be multiplied at loads between 2MPa and 50MPa. The high temperature resistance ensures a wide range of applications.
Typical application areas
- Vending machinery
- Automotive
- Glass industry
- Mechanical engineering
When do I use it?
- When I am looking for a highly wear-resistant material for rotations at medium and high loads
- When I am looking for a low-cost material for high temperatures
- When a press fit up to +150°C is required
- When high wear resistance is required at high loads
- When the material is exposed to shocks and impacts
When not to use it?
- At temperatures above +180°C continuously
- When the lowest friction is required
- When a cost-effective low-friction material is required
- At high peripheral speeds
Unsure if it fits?
