1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: HSM-0304-03
- Material: iglide® H
- Shape: Shop sleeve bearings
- Dimensions:
- d1 3 mm
- d2 4.5 mm
- b1 3 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- High resistance to temperature and chemicals
- Can be used underwater
- For high temperatures
- Resistant to chemicals
iglidur® H | High temperature and chemical resistance
iglidur® H is a fibre-reinforced thermoplastic material that was specially developed for applications in high humidity or under water. iglidur® H can be used completely free of lubrication; in wet applications, the surrounding media acts as additional lubricant. Suitable for temperatures up to +200°C. Very low coefficient of friction when used with hardened shafts.
Typical applications
- Beverage industry
- Medical technology
- Offshore
- Shipbuilding
When to use it?
- For underwater applications
- When high temperature resistance is required
- For high mechanical loading
- For applications in contact with chemicals
When not to use it?
- When extremely high wear resistance under water is required
- When the best universal resistance to chemicals is required
- For maximum compressive strength at higher temperatures
Unsure if it fits?
