drylin® D8 stepper motor driver (NEMA23/24)

dryve motor control - connect, select, control...

Precise Positioning, Endless Moves, Continuous End to End Moves - simply defined with the new web-based control system for gantries and 3 axis robots.

• No software or app installation required
• Fast commissioning
• Compatible with numerous industrial controllers (e.g. Siemens S7 / Beckhoff)
• For stepper motors
• Inexpensive

Ready for immediate use
The dryve motor control can be adapted to your needs with just a few dip switch settings.
In this way, all the necessary settings can be made in a minute.

Accurate Positioning - Pulse Mode
Pulse can be used to perform accurate positioning. With this, each step of the motor can be subdivided into another 128 partial movements
The path planning and output of the clock frequency are taken over by a higher-level controller.

Easy motion control - JOG or LOOP mode
If movements are to be carried out at a predefined speed at the "push of a button", this can be implemented with the JOG mode.
On the other hand, if a continuous movement with a predefined speed between two end positions is to be executed, the loop mode can be used for this.

Strong technique
The high supply voltage of up to 48 V ensures high motor speeds. The rated current of 4 A matched to the motor and the high peak current of 5 A result in powerful and dynamic movements.