drylin® E stepper motor, stranded wires with JST connector, NEMA11

MOT-AN-S-060-001-028-L-A-AAAA product image

MOT-AN-S-060-001-028-L-A-AAAA technical drawing

1 of 5

drylin® E stepper motor, stranded wires with JST connector, NEMA11

Installation size: NEMA11/flange dimension 28mm
Protection class: IP40
Holding torque: 0.12Nm
Rated current: 1.00A
Motor connection: stranded wires with JST connector

Item no.

MOT-AN-S-060-001-028-L-A-AAAA

NEMA11: tiny but with plenty of power

This motor has very compact dimensions. Even so, heavy loads can be moved with the suitable lead screw pitch. This motor is typically used on small test and analysis equipment and miniature adjustments.

Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.

Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.