drylin® E stepper motor with connector, NEMA 11

Standard

MOT-AN-S-060-001-028-M-A-AAAA product image

MOT-AN-S-060-001-028-M-A-AAAA technical drawing

1 of 5

drylin® E stepper motor with connector, NEMA 11

Installation size: NEMA11/flange dimension 28mm
Protection class: Motor housing IP65 (shaft seal IP52)
Holding torque: 0.12Nm
Rated current: 1.00A
Motor connection: Metric M12 connector

Item no.

MOT-AN-S-060-001-028-M-A-AAAA

NEMA11: tiny but with plenty of power

This motor has very compact dimensions. Even so, heavy loads can be moved with the suitable lead screw pitch. This motor is typically used on small test and analysis equipment and miniature adjustments.

Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.

The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water.