drylin® E stepper motor, stranded wires with JST connector, NEMA24

MOT-AN-S-060-035-060-L-A-AAAA product image

MOT-AN-S-060-035-060-L-A-AAAA technical drawing

1 of 5

drylin® E stepper motor, stranded wires with JST connector, NEMA24

Installation size: NEMA24/flange dimension 60 mm
Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
Holding torque: 3.50Nm
Nominal current: 4.20A
Moto connection: Strand with JST connector

Item no.

MOT-AN-S-060-035-060-L-A-AAAA

NEMA24: power motor in medium installation size

A development extension of the typical NEMA24 with nearly twice the torque. The assembly dimensions are identical to the NEMA24, allowing many applications.

Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.

Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.