drylin® E stepper motor, stranded wires with Molex connector, NEMA34

MOT-AN-S-060-059-086-L-A-AAAA product image

MOT-AN-S-060-059-086-L-A-AAAA technical drawing

1 of 4

drylin® E stepper motor, stranded wires with Molex connector, NEMA34

Installation size: NEMA 34 / flange dimension 86 mm
Protection class: IP40
Holding torque: 5.90 Nm
Nominal current: 6.40 A
Motor connection: stranded wires with Molex connector

Item no.

MOT-AN-S-060-059-086-L-A-AAAA

NEMA34: the power pack of the large installation size

Applications with higher loads are adapted using the largest series. Heavy-duty format adjustments or parallel dual axis setups are among its primary duties.

Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.

Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.