drylin® E stepper motor, stranded wires with Molex connector and encoder, NEMA34

MOT-AN-S-060-059-086-L-C-AAAC product image

MOT-AN-S-060-059-086-L-C-AAAC technical drawing

1 of 5

drylin® E stepper motor, stranded wires with Molex connector and encoder, NEMA34

Installation size: NEMA 34 / flange dimension 86 mm
Protection class: IP40
Holding torque: 5.90 Nm
Nominal current: 6.40 A
Motor connections: stranded wires with Molex connector, encoder with JST connector

Item no.

MOT-AN-S-060-059-086-L-C-AAAC

NEMA34: the power pack in large installation size

Applications with higher loads are implemented using the largest series. Heavy-duty format adjustments or parallel dual axis setups are among its primary duties.

Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.

The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water.

The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.