1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: GSM-1012-14
- Material: iglide® G
- Shape: Shop sleeve bearings
- Dimensions:
- d1 10 mm
- d2 12 mm
- b1 14 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for the 96 PFAS substances considered critical for the environment and health using the SQP M1227 test method (LC-MS/MS and GC-MS) and do not contain any substances >0.1% by mass. This category excludes substances from the group of fluoropolymers.
- Most popular iglide® material worldwide
- High wear resistance
- Resistance to dust and dirt
- Cost-effective
iglidur® G | The all-rounder
The widest range of different requirements is covered by iglidur® G. Therefore, the material is rightly called universal. Typical applications include medium to high loads, medium surface speeds and medium temperatures. iglidur® G is the decathlete among iglidur® materials. It performs very well in all technical disciplines and is the classic all-rounder, primarily with respect to the overall general, mechanical, thermal and tribological specifications.
Typical areas of application
- Agriculture
- Automotive
- Construction machinery
- Machine tools
- Fitness and sports
When to use it?
- When an economical all-round performance material is required
- For low to average surface speeds
- When the material needs to run on different shaft materials
- For pivoting and rotational movements
When not to use it?
- When mechanical rework is required
- When the highest wear resistance is required
- When universal chemical resistance is required
- When temperatures are continuously greater than +130°C
- When used under water
Unsure if it fits?
