1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: P210FM-2528-25-SG03-050
- Material: iglide® P210
- Shape: Sleeve bearings with flange and felt seal
- Dimensions:
- d1 25 mm
- d2 28 mm
- d3 40 mm
- b1 25 mm
- b2 2.5 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
- Clean bearings even with dirt and dust, thanks to felt seal
- In laboratory tests, an up to 50 times higher service life was achieved
- High wear resistance
iglidur® P210 | Specialist for pivoting and roller applications and more - good friction and wear values on almost any shaft
With iglidur® P210, the user has a versatile all-rounder material at his disposal, which has an above-average service life, especially in pivoting applications with medium loads of up to 20MPa. The versatile material has already proven itself in numerous customised solutions and as a bar stock material. Clip-on or pre-loaded designs and use in vehicle interiors are possible.
Typical application areas
- Agricultural engineering
- Mechanical engineering
- Furniture / Industrial design
- Textile industry
When do I use it?
- When a universal material is sought for use in damp environments
- When a very wear-resistant material is sought for pivoting applications in the medium load range
- When edge loads and impacts occur
- When the surface pressure of iglidur® J is not sufficient
When do I not use it?
- When a universal material with the greatest possible dimensional diversity is sought
- When a material for very highly loaded swivel applications is required
- When temperatures greater than +100°C occur
Unsure if it fits?
