1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: H4FM-0405-04
- Material: iglide® H4
- Shape: Flange bearings
- Dimensions:
- d1 4 mm
- d2 5.5 mm
- d3 9.5 mm
- b1 4 mm
- b2 0.75 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for the 96 PFAS substances considered critical for the environment and health using the SQP M1227 test method (LC-MS/MS and GC-MS) and do not contain any substances >0.1% by mass. This category excludes substances from the group of fluoropolymers.
- The automotive standard for temperatures up to +392 °F
- Low coefficients of friction
- High wear resistance
- High temperature resistance –104 °F to +392 °F
iglidur® H4 | The automotive standard for temperatures up to +200°C
iglidur® H4 stands for high load-bearing capacity, good abrasion resistance and good temperature resistance when economic aspects are also in the foreground. Temperatures up to +200°C, permissible surface pressure up to 65MPa, very good chemical resistance are just some of the essential attributes. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to the similarly very cost-effective iglidur® H2.
Typical application areas
- Vending machinery
- Automotive
- Packaging industry
When do I use it?
- For use with fuels, oils, etc.
- When high wear resistance is required
- For low coefficients of friction For high temperature resistance from -40°C to +200°C For high chemical resistance
When should I not use it?
- For underwater use
- If you are looking for a low-cost universal material
- If you are looking for a temperature-resistant and media-resistant material for predominantly static applications
Unsure if it fits?
