1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: J350FI-0203-03
- Material: iglide® J350
- Shape: Shop flange bearings
- Dimensions:
- d1 0.125 inch
- d2 0.1875 inch
- d3 0.312 inch
- b1 0.1875 inch
- b2 0.032 inch
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- Endurance runner with high dimensional stability at high temperature - Can be used with many kind of shafts and loads
- Excellent coefficient of friction against steel
- Continuous service temperature up to +356 °F
- For medium and high loads
iglidur® J350 | Endurance runner with high dimensional stability at temperature - applicable with many shafts and load collectives
A superior material for rotational applications - and that on many different steel shafts: The service life of iglidur® J350 can often be multiplied at loads between 2MPa and 50MPa. In addition, the high temperature resistance makes it a very versatile material.
Typical applications
- Vending machinery
- Automotive
- Glass industry
- Machine tools
When to use it?
- When a wear-resistant material for rotational movement at medium and high loads is required
- When a cost-effective material is required for use at high temperatures
- When press-fit up to +150°C is necessary
- When high wear resistance is required at high loads
- When the material is exposed to shock loading
When not to use it?
- When continuous operating temperatures are higher than +180°C
- When the lowest friction is required
- When a cost-effective, low-friction mterial is sought
- At high peripheral speeds
Unsure if it fits?
