- Part number: J3BFM-0608-06
- Material: iglide® J3B
- Shape: Flange bearings
- Dimensions:
- d1 6 mm
- d2 8 mm
- d3 12 mm
- b1 8 mm
- b2 1 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
- Excellent wear resistance at room temperature
- Very good wear resistance at medium temperatures
- Excellent friction coefficients
- Low moisture absorption
- Good wear resistance under water
- High media resistance
- Resistant to edge pressure
- Resistant to shocks and impacts
- Resistant to dirt and dust
iglide® J3B | iglide® J3, available in black
The proven long-life material iglide® J3 is now available in black as well. The endurance runner is a specialist for pivoting and pulsating loads and also media-resistant.
iglide® J3B offers all the same benefits of J3: it has good wear resistance at low to medium loads and high speed. The lifetime is up to 300% longer than iglide® J. It also has low coefficients of friction, good liquid media resistance, and very little humidity absorption.
Typical application areas:
Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
