- Part number: ESM-0608-06
- Material: iglide® E
- Shape: Sleeve bearings
- Dimensions:
- d1 6 mm
- d2 8 mm
- b1 6 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
- Very low friction values
- Wear-resistant endurance material
- Vibration dampening
iglide® E | Long service life with aluminum shafts
iglide® E is characterized by its long service life when combined with aluminum shafts. It offers particularly good wear properties, especially in linear and pivoting motion profiles. It has a very low coefficient of friction and is vibration-dampening. iglide® E lasts up to 3 times longer in rotating and linear applications than iglide® J. Typical areas of application include the textile industry, packaging, printing, and vending machine technology.
Typical areas of application:
Tolerances and measuring system
The installation dimensions and tolerances of iglide® plain bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are crucial for the material. Plain bearings with low moisture absorption can be installed with minimal bearing clearance. Regarding wall thickness, the following applies: the thicker the bearings, the greater the bearing clearance required.
Assembly
iglide® plain bearings are press-fit bushings. The inner diameter is only adjusted to the appropriate tolerance after being pressed into the mounting bore. The press-fit interference can be up to 2% of the inner diameter. This ensures a secure press fit of the bearings. Axial or radial displacement in the housing is thus reliably prevented.
