My contact person
igus® inc.

PO BOX 14349

East Providence

RI 02914

Fon +1 800 521 2747

Fax +1 401 438 7270

iglide® P, sleeve bearing with flange, mm

  • The cost-effective outdoor all-around performer - No moisture expansion even with high ambient humidity
  • Low water absorption
  • Low wear rates
  • High load capacity
Product description
iglide® P | The cost-effective outdoor all-around performer - No moisture expansion even with high ambient humidity
 
  • Low water absorption
  • Low wear rates
  • High load capacity
  • Cost-effective
  • Lubrication and maintenance-free
  • Standard range from stock
Due to thermal stability and low water absorption, the iglide® P bearings with flange are among the most dimensionally stabile allround bearings under varying environmental conditions. iglide® P bearings are recommended for swivel and rotation movements for medium loads.
 
Typical application areas

Machine tools
Solar technology
Fitness/physical therapy equipment
Railway technology

You will find plenty of additional application areas at our Industry solutions
 
 
When to use it?
  • If low moisture absorption is requested
  • When a cost-effective bearing for high pressure loads is required
  • When high precision in high humidity and moderately high temperatures are needed
When not to use?
  • When the maximum application temperature is above +248 °F
  • When mechanical reaming of the wall surface is necessary
  • When the highest wear resistance is required

 
Use our filter options to find the most suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
 
Certificates and standards
RoHS compliant<br>According to 2011/65/EU (RoHS 2)
Technical data
Accessories
Downloads

Consulting

I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm

Online:

24h