Spherical insert bearing, injection-molded, JEI-SP, inch, igubal®

igubal JEI-SP – the versatile endurance runner 

The JEI-SP spherical insert bearing, produced using the injection moulding process, can be used in pillow block bearings and flanged mounted bearings. It is made of the high-performance plastic iglidur J, which is characterised by particularly low wear, a long service life and low moisture absorption.

Thanks to the embedded solid lubricant, no additional lubrication is required, which makes operation in contaminated environments particularly advantageous. Our spherical insert bearings are easy to install and offer a cost-effective and lightweight alternative to a conventional metal ball bearing.

In our shop, you will also find flange mounted bearings and pillow block bearings with plastic housings, which have a positive effect on the total weight of your system.

igubal J spherical insert bearing

• Temperature range [°C]: -50 to +90, short-term +120
• Shaft diameter: 17mm - 24mm
• Advantages: Maintenance-free, lubrication-free, long-lasting, resistant to dust and dirt, vibration-dampening, good chemical resistance, low moisture absorption, good wear resistance, resistant to radiation intensity up to 3 · 10²Gy.
• Dimensional series: Based on DIN 626-1 (rolling bearing - radial deep groove ball bearing with spherical outer ring surface and extended inner ring - Part 1: Insert bearing)
• Application environment: High speeds, high wear resistance at low to medium pressure loads, low wear with a variety of different shafts, low coefficients of friction in dry operation, excellent performance with soft shafts