1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: Q290FM-8085-100
- Material: iglide® Q290
- Shape: Shop flange bearings
- Dimensions:
- d1 80 mm
- d2 85 mm
- d3 93 mm
- b1 100 mm
- b2 2.5 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PTFE-free: All iglide materials labeled as "PFAS-free" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- For moderate to high loads, especially on soft shafts
- Long life especially on soft shafts
- Resistant to edge loads
- Continuous use up to +284 °F
Iglidur® Q290 | medium to high loads, especially on soft shafts
iglidur® Q290 shows excellent service life in robust swivel applications, such as those frequently encountered in agricultural machinery, especially on “soft” shafts (e.g. galvanized). The stress on the shafts is also minimal.
Typical areas of application
- Agricultural technology
- Construction machinery
When do I use it?
- When a durable material is required for robust
- operating conditions (agriculture, construction machinery, ...)
- with medium to high dynamic loads
- on “soft” shafts is required
When should I not use it?
- If permanent static loads greater than 55 MPa occur
- If a very wear-resistant material is required on “soft” shafts
- is required for low loads
- If temperatures greater than +140 °C occur permanently
Unsure if it fits?
