drylin® R – Inch Support Hard–Anodized Aluminum Shafting

1 of 2

Material: 6061-T6
Straightness: 0.004”/ft
Hardness: 75 HB
Surface: hard-anodized
mil-A-8625 Type III Class II
Layer Thickness: > .0016”
Surface Hardness: 450-550 HV
approx. (60 RC)
Roughness: RMS = 4-20
Spec. Electr. Resistance: 4*1011 Ohm mm2/m
Chemical Resistance: 2< ph<9
Add weights for each size in lbs/ft and then (kg/m) in parentheses
Standard saw cuts are +/- 0.04" (1mm)

Item no.

AWUI-08

Outer diameter d [mm]

12.7 (0.5 in)

Hole pattern

Standard

Drylin® R aluminium shaft, imperial, AWUI is made from EN AW 6061/6060. It is hard anodized with a hardness up to 550 HV. Due to the technical surface finish slight color variations may occur between shafts. This shaft is cut to a tolerance of +/- 1 mm unless otherwise specified. Custom tolerances are available on request. Our iglide J and J200 liners pair best with our anodized aluminum shafting. A160 and E7 can also be used on this shafting material while our X liners should be avoided.

Unsure whether it fits?

Ask the linear technology expert

Do you have questions? We're here to help!

drylin linear systems sample box

Request a Linear Assemblies Sample Box

Contains: high helix lead screw and nut, drylin R shaft and bearing, and drylin T rail and carriage

drylin® R – Inch Support Hard–Anodized Aluminum Shafting

Product Description

Technical Data

Downloads

Consulting

I look forward to answering your questions

Shipping and consultation